All products
Aiko
Air Source Heat Pumps
Air Source Heat Pumps Packages
All Black Solar Panlels
Alpha Battery Storage Range
Battery Storage
Best Selling Products
BiFacial Solar Panels
Build a PV kit
Bulk Deals
Buying Home Battery Storage has never been so simple - Installed Packages
Canadian Solar
Commercial Battery Storage Systems
Design & Installations
Duracell
Electric Boilers
Electric Car Chargers
Energy Saving & Accessory Products
Enphase IQ All in One
Enphase Micro Inverters
Eurener Solar Panels
Flexible & semi-flexible solar panels
Fox ESS Low Voltage
Fox ESS Solar Inverters
FOX HIGH VOLTAGE
Full Range of Solar Inverters
GivEnergy Battery Storage
Givenergy EV Car Charger
Growatt 6.5KWH Battery
Growatt AC-Coupled Inverter
Growatt Battery Storage
Growatt GBLI6532
Growatt Inverter 5KW Battery
Growatt Monitoring System
Growatt Solar Inverters
GSL Energy All In One
Hot Water All In One ASHP
Huawei Battery Storage
Huawei Optimisers
Hybrid Inverters / Battery Chargers
Hyundai Solar Panels
ICS
Infrared heating
JA Solar Panels
Jinko Solar Panel
Libbi All In One Home Battery Storage
Longi Solar Panels
Lower delivery cost available specifically for solar panels on this page from 1-4 panels
Most Popular
Mounting Options
Newest Products
Pylontech Battery
QCells Solar Panels
REC Solar panels
SMA Solar Inverters
SoFar Solar Inverters
Solar & Battery Storage Kits
Solar Accessories
Solar Panel Full Range
Solar Thermal
SolarEdge
SolarEdge Battery Storage
SolarEdge Optimisers
SolarEdge Optimizers / Enphase Micro-inverters International
SolarEdge Smart Solar Panel
Solax Battery Storage Range
Solax Inverters
Solis Solar Inverters
Special Offers
Sunpower Solar Panels
Sunsynk On & Off grid battery Storage
Swimming Pool ASHP
Tigo Optimisers
Trina Solar panels
Victron Complete Kits
Victron Energy Range
Viridian In-Roof Integrated Panels
Warranties
4mm2 single-core DC solar cable 50m - Black £38 + VAT
£45.82 incl. VAT
4mm2 single-core DC solar cable 50m - Black
#1:CABLE4-1-50 Cables - DC Cables
4 mm², single-core, black, 50m NEW H1Z2Z2-K certified
50m solar cable with length label.
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.
H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION
Conductor Flexible tinned copper (Class 5)
Insulation Halogen-free cross-linked compound
Outersheath Halogen-free cross-linked flame retardant compound
The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
4mm2 single-core DC cable 100m - Black £71 + VAT
£84.95 incl. VAT
4mm2 single-core DC cable 100m - Black
#1: CABLE4-1-100
4 mm², single-core, black, 100m NEW H1Z2Z2-K certified
100m solar cable with length label.
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.
H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION
Conductor Flexible tinned copper (Class 5)
Insulation Halogen-free cross-linked compound
Outersheath Halogen-free cross-linked flame retardant compound
The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
As with the TƒœV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.
4mm2 single-core DC cable 250m - Black £158 + VAT
£190.08 incl. VAT
4mm2 single-core DC cable 250m - Black
#1: CABLE4-1-250
4 mm², single-core, black, 250m NEW H1Z2Z2-K certified
250m solar cable with length label.
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40°C to +90°C. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.
H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION
Conductor Flexible tinned copper (Class 5)
Insulation Halogen-free cross-linked compound
Outersheath Halogen-free cross-linked flame retardant compound
The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
As with the TƒœV PV1-F cable, the EN50618 cable benefits from a double-insulation offering increased safety. The Low Smoke Zero Halogen (LSZH) insulation and sheathing makes them suitable for use in environments where corrosive smoke would present a risk to human life in the event of fire.
6mm2 single-core DC solar cable 100m - Black £107 + VAT
£128.72 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1: CABLE6-1-100 Cables - DC Cables
6 mm single-core, black, 100m
100m solar cable with length label
Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to�1.5kV�between conductors as well as between conductor and earth, and not exceeding�1800V.�EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous T�V approved PV1-F cable.
6mm2 single-core DC solar cable 250m - Black £237 +VAT
£284.40 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1:CABLE6-1-250 Cables - DC Cables
250m solar cable with length label. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TƒœV approved PV1-F cable.H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTIONConductor Flexible tinned copper (Class 5)Insulation Halogen-free cross-linked compoundOutersheath Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.
6mm2 single-core DC solar cable 500m - Black £444 + VAT
£533.17 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1:CABLE6-1-500 Cables - DC Cables
6 mm², single-core, black, 500m
500m solar cable with length label. Supplied on a reusable spool.
Conductor cross-section: 6 mm² (this is not the cable diameter, but rather the cross-sectional area). System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black
It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.
6mm2 single-core DC solar cable 1000m - Black £867 + VAT
£1,040.41 incl. VAT
6mm2 single-core DC solar cable 50m - Black
#1:CABLE6-1-1000 Cables - DC Cables
6 mm², single-core, black, 1000m
500m solar cable with length label. Supplied on a reusable spool.
Conductor cross-section: 6 mm² (this is not the cable diameter, but rather the cross-sectional area). System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black
It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.
10mm2 single-core DC solar cable 100m - Black £172.50 + VAT
£207.00 incl. VAT
10mm2 single-core DC solar cable 100m - Black
#2: CABLE10-1-100
100m solar cable with length label. Supplied on a reusable spool.
Conductor cross-section: 10 mm² (this is not the cable diameter, but rather the cross-sectional area). System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black
Projoy AC Isolator 25A 3pole £7.45 +VAT
£8.94 incl. VAT
Projoy DC Isolator 25A 3pole
#1: PEAS69-EL25R-3 Switches - AC Isolators
#17: 4479
Minimum order:3 unless combined with other items
PEAS69-EL Enclosure AC Isolator 25A
Features
Special silver alloy contact, long electrical life, high reliability
Small size, save installation space
It has a structure to protect the fingers and operate safely
Seal switch box type
IP66 protection level
Products through CE, TUV certification
Specs
Weight: 0.4 kgRelated Power: 5,750 WPoles: 3Max Cable: 10 mm2Max Voltage: 1,500 VRated Current: 25 ARated Voltage: 230 V
Projoy AC Isolator 32A 4pole £8.95 +VAT
£10.74 incl. VAT
Projoy AC Isolator 32A 4pole
#2: PEAS69-EL32R-4 Switches - AC Isolators
Minimum order:3 unless combined with other items
PEAS69-EL Enclosure AC Isolator 32A
Features
Special silver alloy contact, long electrical life, high reliability
Small size, save installation space
It has a structure to protect the fingers and operate safely
Seal switch box type
IP66 protection level
Products through CE, TUV certification
Specs
Weight: 0.4 kgRelated Power: 7,360 WPoles: 4Max Cable: 10 mm2Max Voltage: 240 VRated Current: 32 ARated Voltage: 230 V
Europa IMO Stag AC Isolator 4 Pole 20 Amp £14 +VAT
£16.86 incl. VAT
IMO Stag AC Isolator 4 Pole 20 Amp
#1: IMO-IS4P20 Switches - AC Isolators
Stag AC Isolator Switch - 4 Pole Enclosed 20A AC Switch Isolator
IP65 Protection Rating (enclosure)
EN 60947-3 Compliant
Multiple Gland Knockouts
Lockable Rotary Handle
Flame Retardant
External Mounting Points
Additional Earth Connection
Interlocked Enclosure Lid
Measurements
H - 125
W - 100
D - 85
D (including handle) - 120
Weight: 0.52 kgRated Power: 13,840 WPoles: 4Max Cable: 10 mm2Max Voltage: 690 VRated Current: 20 ARated Voltage: 230 V
IMO Stag AC Isolator 4 Pole 32 Amp £17 +VAT
£20.87 incl. VAT
IMO Stag AC Isolator 4 Pole 32 Amp
#1: IMO-IS4P32 Switches - AC Isolators
#17: *32A 4-pole* AC Isolator - IMO Stag
Stag AC Isolator Switch - 4 Pole Enclosed 32A AC Switch Isolator
IP65 Protection Rating (enclosure)
EN 60947-3 Compliant
Multiple Gland Knockouts
Lockable Rotary Handle
Flame Retardant
External Mounting Points
Additional Earth Connection
Interlocked Enclosure Lid
Measurements
H - 125
W - 100
D - 85
D (including handle) - 120
Weight: 0.52 kgRated Power: 22,144 WPoles: 4Max Cable: 10 mm2Max Voltage: 690 VRated Current: 32 ARated Voltage: 415 VRated Current: 32 A
IMO Stag AC Isolator 4 Pole 32 Amp - Single phase £17.18 +VAT
£20.62 incl. VAT
IMO Stag AC Isolator 4 Pole 32 Amp - Single phase
#2: IMO-IS4P32-1P Switches - AC Isolators
#3: 4993
4 Pole Enclosed 32A AC Switch Isolator
Features
IP65 Protection Rating (enclosure)
EN 60947-3 Compliant
Multiple Gland Knockouts
Lockable Rotary Handle
Flame Retardant
External Mounting Points
Additional Earth Connection
Interlocked Enclosure Lid
Specs
Weight: 0.52 kg
Rated Power: 22,144 W
Poles: 3
Max Cable: 10 mm2
Max Voltage: 400 V
Rated Current: 32 A
Rated Voltage: 415 V
Rated Current: 32 A
Rated Voltage: 230 V
Rated Current: 0 A
Rated Voltage: 0 V
Dimension: 100mm x 125mm x 85mm (w x h x d) (depth is incl. handle)
Europa LB324P Rotary Isolator Switch 32A 4 Pole £18 +VAT
£21.90 incl. VAT
Europa LB324P Rotary Isolator Switch 32A 4 Pole
#1:EUR-LB324P Switches - AC Isolators
4 Pole Enclosed 32A AC Switch Isolator. Polycarbonate enclosure / UV resistant Padlockable in the OFF position for added security. Height: 125mm Width: 100mm Depth: 74mm
Supplier Part No: LB324PWeight: 0.527 kgRated Power: 7,500 WPoles: 3Max Cable: 10 mm2Max Voltage: 690 VRated Current: 32 ARated Voltage: 690 V
K&N Three Phase AC Switch Disconnector 25A £22 +VAT
£25.80 incl. VAT
K&N Three Phase AC Switch Disconnector 25A
#1: KG20-T204-GBA486 Switches - AC Isolators
#3: 18
#17: *25A 3-pole* AC Isolator - Kraus Naimer
Kraus & Naimer DC Switch
Suitable for three phase AC connection.Plastic Enclosures, Protection IP66, totally insulated, knock-outs Handle red, in the OFF-position lockable with padlocks, Plate Backing grey Dimensions (w x h x d): 100mm x 190mm X 93mm Switch interlocked with lid to prevent opening in "ONE" positionWeight: 0.48 kgRated Power: 17,320 WPoles: 4Max Cable: 10 mm2Max Voltage: 690 VRated Current: 25 ARated Voltage: 400 V
IMO Stag AC Isolator 4 Pole, 63 Amp £25 +VAT
£30.40 incl. VAT
IMO Stag AC Isolator 4 Pole, 63 Amp
#1: IMO-IS4P63
#3: 4555
#17: IMO 63A AC Isolator 4-pole
Stag AC Isolator Switch - 4 Pole Enclosed 63A AC Switch Isolator
IP65 Protection Rating (enclosure)
EN 60947-3 Compliant
Multiple Gland Knockouts
Lockable Rotary Handle
Flame Retardant
External Mounting Points
Additional Earth Connection
Interlocked Enclosure Lid
Measurements
H - 175
W - 115
D - 100
D (including handle) - 135
Weight: 0.75 kgRated Power: 14,490 WPoles: 4Max Cable: 16 mm2Max Voltage: 690 VRated Current: 63 ARated Voltage: 230 VRated Current: 63 ARated Voltage: 440 V