Products (874)

150W 12V/24V Folding Solar Panel Without a Solar Charge Controller #21: 150W 12V/24V Folding Solar Panel Without a Solar Charge Controller Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 1 panel. *Collections are not permitted due to health & safety regulations*  This premium, waterproof 100W folding solar panel is perfect for charging 12V or 24V batteries in vehicles and boats—such as motorhomes, caravans, campers, narrowboats, or yachts—or any system using a 12V/24V battery bank. It offers a flexible solar solution without the need for permanent installation, easily folding away for storage when not in use. As this folding solar panel is sold without a charge controller, you can pair it with a controller best suited to your setup. It can connect to existing or new controllers, including advanced models with MPPT, dual battery support, mobile app access, and more. The panel supports remote controller mounting for convenience and can be linked with additional panels to boost output through a larger controller. Pre-wired for 12V use (with 24V possible via re-wiring or a buck-boost controller), it includes 5m of cable, an adjustable stand, carry handle, latches, and a protective foam-lined case with reinforced corners for durability and portability. Features: Ultra lightweight Easily transportable Suitable for all weather conditions High efficiency  100% waterproof Adjustable folding stand to maximise output Sturdy protective case Warranty: 1 year   Specs Weight: 15 kg Peak power:  150W  Maximum power voltage: 17.5V Maximum power current: 8.32A (2 x 4.16A) Open circuit voltage: 21.6V Short circuit current: 9.0A (2 x 4.5A) Power allowance: +/- 3% Dimensions: 51 x 101 x 7cm (folded) Please note: This solar panel is not supplied with a user manual, however a detailed user manual is provided with your chosen solar charge controller.

165W Flexible Cigs Solar Panel with Self-Adhesive Backing #21: 165W Flexible Cigs Solar Panel with Self-Adhesive Backing 165W Datasheet 165W Technical Drawing  Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 1 panel. *Collections are not permitted due to health & safety regulations*  Manufactured in Sweden to top European quality standards, these TUV-certified SELM flexible solar panels use advanced CIGS thin-film technology.SELM panels offer one of the most eco-friendly and versatile solar solutions available. They deliver exceptional efficiency, even in shaded conditions, while remaining lightweight, durable, and highly adaptable. With its flexible form factor, these panels are perfect for curved surfaces, modern architecture, industrial projects, rooftops, and mobile setups (i.e. low narrowboat decks or motorhome roofs). These panels can also be used on metal 'standing-seam' roofs to provide power to buildings, either in off-grid environments, or grid-connected ones using a suitable inverter. The incredibly low profile and discreet colour means that you will hardly even notice the panels are there, yet they will churn out power for years with no maintenance at all - a superb bit of kit! Features: Long lasting technology Shatterproof and crack proof  Superior shading performance Easy install - peel and stick Lowest carbon footprint in the industry Record efficiency levels - with CIGS fully flexible solar cells  Lightweight - low installed weight  Product Warranty: 10 years Performance Warranty: 25 years   Specs Weight: 4.0 kg Peak power:  165W  Maximum power voltage: 25.0V Maximum power current: 6.6A Open circuit voltage: 30.4V Short circuit current: 7.6A Dimensions: 4025 x 358 x 2mm Please note: this solar panel is supplied without solar cable and requires additional cables for connection. It is recommended to purchase a pair of 5m 4.0mm2 cable with MC4 compatible connectors. Please note: this panel requires a solar charge controller / regulator to charge a 12V battery. It cannot be connected directly to the battery.  

185W Flexible Cigs Solar Panel with Self-Adhesive Backing #21: 185W Flexible Cigs Solar Panel with Self-Adhesive Backing 185W Datasheet 185W Technical Drawing  Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 1 panel. *Collections are not permitted due to health & safety regulations*  Manufactured in Sweden to top European quality standards, these TUV-certified SELM flexible solar panels use advanced CIGS thin-film technology.SELM panels offer one of the most eco-friendly and versatile solar solutions available. They deliver exceptional efficiency, even in shaded conditions, while remaining lightweight, durable, and highly adaptable. With its flexible form factor, these panels are perfect for curved surfaces, modern architecture, industrial projects, rooftops, and mobile setups (i.e. low narrowboat decks or motorhome roofs). These panels can also be used on metal 'standing-seam' roofs to provide power to buildings, either in off-grid environments, or grid-connected ones using a suitable inverter. The incredibly low profile and discreet colour means that you will hardly even notice the panels are there, yet they will churn out power for years with no maintenance at all - a superb bit of kit! Features: Long lasting technology Shatterproof and crack proof  Superior shading performance Easy install - peel and stick Lowest carbon footprint in the industry Record efficiency levels - with CIGS fully flexible solar cells  Lightweight - low installed weight  Product Warranty: 10 years Performance Warranty: 25 years   Specs Weight: 4.4 kg Peak power:  185W  Maximum power voltage: 27.3V Maximum power current: 6.6A Open circuit voltage: 34.2V Short circuit current: 7.6A Dimensions: 3077 x 516 x 2mm Please note: this solar panel is supplied without solar cable and requires additional cables for connection. It is recommended to purchase a pair of 5m 4.0mm2 cable with MC4 compatible connectors. Please note: this panel requires a solar charge controller / regulator to charge a 12V battery. It cannot be connected directly to the battery.  

Battery Cabinet 18U Fits: 9 x Pylontech US2000C, 6 x US3000C or 4 x US5000- Black 600mmW × 600mmD x 902mmH   #20: RACKY-18U Racky Data Sheet   Accessories: The Nuts & Bolts are required to support the batteries. The Brackets, Feet & castors are additional optional extras. The Data Cabinets combine all the features of a premium data cabinet including the aesthetically pleasing design, without the price-point to match. The Data Cabinets are available in various configurations and are supplied fully assembled. Each cabinet utilises a ventilated top and four 19” adjustable front and rear mounting posts. The cabinets feature lift-off sides and a lockable door for maximum access to the internal equipment, with cable access in the base for convenient routing of network cables. The side panels can be fitted with cabinet locks. The cabinet frameworks are finished in black with a toughened glass lockable front door Each Cabinet is assembled in the UK using the highest quality components and boast an impressive load rating of up to 800kg (evenly distributed) and has been designed to ensure easy installation and maintenance. Cable access can be made through removable gland plates in the roof or through the open base. Each Cabinet is supplied fully assembled and ready to go Features: 800kg loading capacity (evenly distributed) Lockable/removable toughened glass front door with steel surround Lockable/removable steel rear door Removable steel side panels Adjustable 19” mounting profiles front and rear Removable gland plates top and bottom for cable access A full range of optional accessories are available to complement the cabinet including Jacking feet, transport castors and cage nuts/bolts. Dimensions By U Height  U Height   Size (HxWxD) Weight       18U   902x600x600 mm  37.8 kg 21U   1035x600x600 mm  48 Kg 24U   1168x600x600 mm   51 Kg 27U   1302x600x600 mm  54.6 Kg 39U   1835x600x600 mm  70 Kg 42U   1968x600x600 mm  74.6 Kg 45U   2103x600x600 mm   92.3 Kg  

1PH/3PH 230/400V SolarEdge Energy Meter K2 with Modbus Connection #1: SE-WND-3Y400-MB-K2 Display - Energy Meter#2: SolarEdge Energy Meter with Modbus Connection#3: SE-WND-3Y400-MB-K2 Energy Meter K2 Inverter Data Sheet Energy Meter K2 Installation Manual Energy Meter K2 Warranty Energy Meter K2 G100 Certification*Collections are not permitted due to health & safety regulations* Modbus Meter for SolarEdge Installations - High accuracy meter readings for production/consumption monitoring- Import/Export meter readings for export limitation functionality- Small and easy to install - fits in standard electrical panel- Supports residential, commercial and utility-size installationsThis is a new -K2 part with updated firmware to support CT disconnection required to meet UK G100 Feed In Limitation requirements. Please note actual product may look slightly different to image shown.The Modbus meter requires CTs to function. Please choose the appropriate current capacity from the Modbus range

GSL Energy 10.24kwh battery & connecting cables only #1: GSL-BAT-HESS51200A-X2 Please view our battery storage information page for sizing and selecting the right battery storage system for you.   GSL Warranty *Collections possible by prior arrangement   GSL 10.24kwh, up to an additional 3 batteries can be added in total.   Compatible with Solis, Sunsynk, Victron & Voltronic   Product Performance 1. Combining functions of inverter, solar charger and battery to offer uninterruptible power support with portable size. 2. LCD display, configure input voltage range for home appliances and personal computers, configure battery charging current based on applications, configure AC/Solar Charge priority. 3. Compatible to mains voltage or generator power, auto restart while AC is recovering. 4. Users can flexibly match battery capacity, standard battery packages or external batteries. 5. It combines a wide PV input range MPPT controller, can convert solar energy from PV to loads directly. 6. Integrated design, Easy transportation and installation. 7. Overload/Over temperature/short circuit protection. 9. Our products are CE/ ROSH/ VDE/ MSDS/ UN38.3/ IEC approved, meeting various certification requirements for different countries.   Product Features - Safety: LiFePO4 LFP Battery, stable and safe. Module, pack, system, triple protection. - Simple: Modulat design, single person can carry and install it. Plug and play, 30 min quick installation. Space saving: 0.15 sqm foot print.   Dimensions per battery: 621 x 214 x 550 Net weight per battery: 93kg Max charging current: 100A Max continuous charging current: 120A Battery capacity: 200AH        

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer with a 3 phase supply in Lennoxtown required around 80kWh of battery storage with a powerful hybrid inverter to meet his requirements. 2 x Sunsynk 12kW was the ideal hybrid system for the project with 8 x 10.24kWh GSL batteries. System spec: 2 x Sunsynk 12kw 3ph 8 x 10.24kWh GSL lithium batteries

(This is an example of one of our installations, this system is not actually available for free so please do not purchase)   Our customer with a 3 phase supply in Caldicot  required around 80kWh of battery storage with a powerful hybrid inverter to meet his requirements. 2 x Sunsynk 12kW was the ideal hybrid system for the project with 8 x 10.24kWh GSL batteries. System spec: 2 x Sunsynk 12kw 3ph 8 x 10.24kWh GSL lithium batteries  

(This is an example of one of our installations, this system is not actually available for free so please do not purchase)   Our customer with a in Taunton required around 20kWh of battery storage with a powerful hybrid inverter to meet his requirements. The ideal solution was going for 2 x Sunsynk 3.6kW Sunsynk hybrids with 2 x 10.24kWh GSL batteries. System spec: 2 x Sunsynk 3.6kw ECCO hybrid 2 x 10.24kWh GSL lithium batteries  

(This is an example of one of our installations, this system is not actually available for free so please do not purchase)   Our customer in Esher with high usage required around 50kWh of battery storage with a powerful hybrid inverter to meet his requirements. 2 x Sunsynk 5kW was the ideal solution for the project with 5 x 10.24kWh GSL batteries. System spec: 2 x Sunsynk 5kW 5 x 10.24kWh GSL lithium batteries  

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Llandudno with space for 5 x 430W Jinko All Black panels on his outbuilding and opted for in-roof GSE mounting to keep it flush on his roof. System spec: 5 x 430w Jinko Tiger Neo All Black 5 x GSE in-roof mounting system

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Bristol with space for 6 x 455W AIKO panels on his flat roof required around 5kWh of battery storage with a powerful hybrid inverter to meet his requirements. The Sunsynk 3.6kW was the ideal hybrid inverter for the project with 5.32kWh Sunsynk L5.3 batterry. System spec: 6 x 455W AIKO All Black Sunsynk 3.6kw North South Flat roof Mounting 5.32kWh Sunsynk L5.3 lithium batterry

(This is an example of one of our installations, this system is not actually available for free so please do not purchase)   Our customer in Swindon with space for 6 x 480W Jinko panels on his outbuilding and opted forSolis 3kw Hybrid with the Dyness 5.12kWh battery   System spec: 6 x 480w Jinko Tiger Neo All Black Solis 3kW Hybrid Dyness 5.12kWh battery  

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in London with space for 45 x 465W AIKO panels System spec: 45 x 465W AIKO panels 2 x 10kW Fox inverters

200A Split-core current transformer (CT for Envoy-S Metered) #1: EN-CT-100-SPLIT Display - Current Sensor Clamps Split-core current transformer (CT), accuracy +/- 1%. For use with Envoy-S Metered and 3phase Envoy-S Metered. Enphase Energy, founded in 2006 in California, is the world leader in micro inverter technology with more than 13 million units sold worldwide and over 500,000 installed systems representing over 3GW of clean energy.

200W 12V/24V Lightweight Folding Solar Panel without a Solar Charge Controller  #21: 200W 12V/24V Lightweight Folding Solar Panel without a Solar Charge Controller Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 1 panel. *Collections are not permitted due to health & safety regulations*  This lightweight, waterproof 200W folding solar panel is perfect for charging 12V/24V batteries in vehicles, boats, or portable power stations. Made from durable monocrystalline solar cells with an ETFE surface and anodised aluminium frame, it offers a reliable, non-permanent solar power solution ideal for travel and outdoor use. Comprised of 2 x highly durable solar panels from monocrystalline solar cells and reinforced with anodised aluminium, it has a strong ETFE surface. This is an ideal solution for experiencing the benefits of solar without the permanency of mounted solar panels. When not in use, this panel can be stored. This panel includes: Adjustable aluminium folding stand 5m battery extension cable 4 cables with different terminal ends, including crocodile clips and bare ended, to connect the panel to your choice of solar charge controller or portable power station Protective storage case  Features: Lightweight Easily transportable Suitable for all weather conditions High efficiency even in low light conditions 100% waterproof Adjustable folding stand to maximise output Sturdy protective case Warranty: 1 year   Specs Weight: 7.38 kg Peak power:  200W  Maximum power voltage: 18.2V Maximum power current: 10.99A  Open circuit voltage: 21.5V Short circuit current: 11.56A  Power tolerance: +/- 5% Dimensions: 900 x 590 x 50mm (folded) Please note: This solar panel is not supplied with a solar charge controller. This enables you the flexibility of choosing a controller best suited to your application. You can use your existing solar charge controller with this panel or use it with a device which has an in-built charge regulator (for example, if your portable power station or portable battery bank has one). Please note this panel comes pre-wired for a 12V battery connection and will require re-wiring for 24V.