Products (865)

Pylontech Pelio-L-5.12 LV Battery Module #2: PYL-PELIO-L-5.12 Pylontech Pelio 5.12 Datasheet Pylontech Pelio 5.12 Installation Manual Pylontech Pelio WiFi Set up Guide *Collections are not permitted due to health & safety regulations* Pylontech Pelio-L-5.12 LV Battery Module Features Expandable modular design, up to 20*5.12kWh in parallel (3-modules stack for wall mounting and 4-modules stack for ground mounting) Lightweight but high capacity batteries Smaller footprint - saving space Both indoor and outdoor compatible Secured by self-developed cells modules and BMS Dual active protection mechanism enhances safety significantly Designed for 15+ years or >8000 charging cycles Compatible with Solis low voltage hybrid/AC inverters Remote monitoring via a plug-in wifi module (supplied with the installation kit, not with the battery itself) Please note: For a wall mounted install, please add: Pylontech Pelio Wall Mount for 1 - 3 batteries (PYL-PELIO-WALL-MOUNT) For a Ground mounted install, please add: Pylontech Pelio Ground Mount for 1 - 4 batteries (PYL-PELIO-GROUND-MOUNT) Specs Weight: 45 kg Rated Power: 5,120 W Battery Type: Lithium Ion Nominal Energy: 5,120 Wh Depth of discharge: 95.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 4,096 W Maximum Discharge Rate (5 Minutes): 5,120 W Surge Discharge Rate (15 Seconds): 6,144 W Maximum Charge Rate (5 Minutes): 5,120 W

Pylontech Pelio-L-5.12 LV x2 Battery Module 10.24kWh #2: PYL-PELIO-L-2-10.24  Pylontech Pelio 5.12  Datasheet Pylontech Pelio 5.12 Installation Manual Pylontech Pelio WiFi Set up Guide *Collections are not permitted due to health & safety regulations* Pylontech Pelio-L-5.12 LV Battery Module This item contains:  2 x Pylontech Pelio-L-5.12 LV Battery Modules (PYL-PELIO-L-5.12) Features Expandable modular design, up to 20*5.12kWh in parallel (3-modules stack for wall mounting and 4-modules stack for ground mounting) Lightweight but high capacity batteries Smaller footprint - saving space Both indoor and outdoor compatible Secured by self-developed cells modules and BMS Dual active protection mechanism enhances safety significantly Designed for 15+ years or >8000 charging cycles Compatible with Solis low voltage hybrid/AC inverters Remote monitoring via a plug-in wifi module (supplied with the installation kit, not with the battery itself) Please note: For a wall mounted install, please add: Pylontech Pelio Wall Mount for 1 - 3 batteries (PYL-PELIO-WALL-MOUNT) For a Ground mounted install, please add: Pylontech Pelio Ground Mount for 1 - 4 batteries (PYL-PELIO-GROUND-MOUNT) Specs Weight: 90 kg Rated Power: 10,240 W Battery Type: Lithium Ion Nominal Energy: 10,240 Wh Depth of discharge: 95.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 4,096 W Maximum Discharge Rate (5 Minutes): 5,120 W Surge Discharge Rate (15 Seconds): 6,144 W Maximum Charge Rate (5 Minutes): 5,120 W

Pylontech Pelio-L-5.12 LV x3 Battery Module 15.36kWh #2: PYL-PELIO-L-3-15.36 Pylontech Pelio 5.12 Datasheet Pylontech Pelio 5.12 Installation Manual Pylontech Pelio WiFi Set up Guide Pylontech Pelio 5.12 Warranty *Collections are not permitted due to health & safety regulations* Pylontech Pelio-L-5.12 LV Battery Module This item contains: 3 x Pylontech Pelio-L-5.12 LV Battery Modules (PYL-PELIO-L-5.12) Features Expandable modular design, up to 20*5.12kWh in parallel (3-modules stack for wall mounting and 4-modules stack for ground mounting) Lightweight but high capacity batteries Smaller footprint - saving space Both indoor and outdoor compatible Secured by self-developed cells modules and BMS Dual active protection mechanism enhances safety significantly Designed for 15+ years or >8000 charging cycles Compatible with Solis low voltage hybrid/AC inverters Remote monitoring via a plug-in wifi module (supplied with the installation kit, not with the battery itself) Please note: For a wall mounted install, please add: Pylontech Pelio Wall Mount for 1 - 3 batteries (PYL-PELIO-WALL-MOUNT) For a Ground mounted install, please add: Pylontech Pelio Ground Mount for 1 - 4 batteries (PYL-PELIO-GROUND-MOUNT) Specs Weight: 135 kg Rated Power: 15,360 W Battery Type: Lithium Ion Nominal Energy: 15,360 Wh Depth of discharge: 95.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 5,120 W Surge Discharge Rate (15 Seconds): 6,144 W Maximum Charge Rate (5 Minutes): 5,120 W

Pylontech Pelio-L-5.12 LV x4 Battery Module 20.48kWh #2: PYL-PELIO-L-4-20.48 Pylontech Pelio 5.12 Datasheet Pylontech Pelio 5.12 Installation Manual Pylontech Pelio WiFi Set up Guide Pylontech Pelio 5.12 Warranty *Collections are not permitted due to health & safety regulations* Pylontech Pelio-L-5.12 LV Battery Module This item contains: 4 x Pylontech Pelio-L-5.12 LV Battery Modules (PYL-PELIO-L-5.12) Features Expandable modular design, up to 20*5.12kWh in parallel (3-modules stack for wall mounting and 4-modules stack for ground mounting) Lightweight but high capacity batteries Smaller footprint - saving space Both indoor and outdoor compatible Secured by self-developed cells modules and BMS Dual active protection mechanism enhances safety significantly Designed for 15+ years or >8000 charging cycles Compatible with Solis low voltage hybrid/AC inverters Remote monitoring via a plug-in wifi module (supplied with the installation kit, not with the battery itself) Please note: For a wall mounted install, please add: Pylontech Pelio Wall Mount for 1 - 3 batteries (PYL-PELIO-WALL-MOUNT) For a Ground mounted install, please add: Pylontech Pelio Ground Mount for 1 - 4 batteries (PYL-PELIO-GROUND-MOUNT) Specs Weight: 180 kg Rated Power: 20,480 W Battery Type: Lithium Ion Nominal Energy: 20,480 Wh Depth of discharge: 95.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 5,120 W Surge Discharge Rate (15 Seconds): 6,144 W Maximum Charge Rate (5 Minutes): 5,120 W

PylonTech US3000C 3.5kWh Li-Ion Solar & wind Battery Storage D.O.D of 95% Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other.  #2: PYLON-US3000C #4: US3000C#17: Pylon 3.5kwh US3000 C Li-ion Battery US3000C Datasheet US3000C Installation Manual US3000C Warranty   To view complete Pylon kits please visit our Pylontech main page Battery to battery connecting cables included as standard The next generation of affordable, reliable storage has arrived. Pylontech's US2000B and US3000 batteries have been a frequent choice for prudent installers who value reliability, wide compatibility and ease of use. Now Pylontech have released an enhanced version of both 2.4kWh and 3.5kWh Li-ion units with impressive features. In a nutshell the new US2000C and US3000C batteries offer a higher depth of discharge - now a staggering 95% - and 16 units can be installed in parallel - double the capacity than before!The US3000C is an HESS solar battery system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety value and most promising life cycle. A self designed BMS protects the cell from abnormal temperature, current, voltage, SoC and SoH.The Pylontech US3000C has an incredible DoD of 95%.Advantages- Vertical industry integration ensures cycle life of 6000 cycles- Compact and fashionable design fits in your home environment- Deliver up to 3.5kW* with single module (3.5kWh) - * please note this value is inverter/charger dependant, typically the maximum sustained value is 1.8kW per battery- Modular design gives the end customers the power of choice of capacity- Compatible with large number of Hybrid inverters- Simple buckle fixing minimize the installation time and cost- Provides pre-charge function to protect ESS system from surge current.- Up to 16 units can be stacked in parallelTo extend the warranty you have to register here: http://en.pylontech.com.cn/service/supportThe US3000C can be used to expand an existing US3000 bank. Please note, the US3000C needs to be used as the master battery when used to expand an existing US3000 bank. * In accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries ahave been insatlled by an electrician or authorised installer.

Pylontech US5000 -1C 4.8kWh Li-Ion Solar Battery 48V (excl. brackets) #2: PYLON-US5000-1C Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other.      US5000-1C Datasheet US5000-1C Installation Manual US5000-1C Warranty US5000-1C Compatibility Sheet To view complete kits please visit our Pylontech main page The Pylontech US5000-1C offers upgraded firmware and increased operation logic from 0.8C to 1.0C. When adding the Pylontech US5000-1C to an existing stack of US5000 then the US5000-1C will need to be the master master. Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 7-year warranty extendable to 10 Long cycle life and superior performance Compatible with tier 1 inverter brands Please note: To activate the extended warranty it must be registered online via this link: http://en.pylontech.com.cn/service/support Specs Supplier Part No: US5000 1C Weight: 40.4 kg Rated Power: 5,000 Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W IIn accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries have been installed by an electrician or authorised installer. Buy Pylontech US5000 here lowest prices.  

Pylontech US5000-1C 4.8kWh Li-Ion Solar Battery 48V Please view our battery storage information page for sizing and selecting the right battery storage system for you.  Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other.  #4 PYLON-US5000-1C#5: Pylon 4.8kWh US5000 Li-ion Battery   US5000 Datasheet US5000 Installation Manual US5000 Warranty US5000 Compatibility Sheet Connecting cables included as standard To view complete kits please visit our Pylontech main page A new battery in the US series from Pylontech. The US5000-1C is a 48V battery with incredible features to provide a competitive edge in the market. Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 5-year warranty extendable Long cycle life and superior performance Compatible with tier 1 inverter brands To extend the warranty you have to register here: http://en.pylontech.com.cn/service/support Supplier Part No: US5000-1C Weight: 38 kg Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W In accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries have been installed by an electrician or authorised installer.

Q Cable Disconnect Tool (1 Item)#1: EN-Q-DISC Tools - Accessories#3: 3419Enphase Cable disconnect tool for Q Cable connectors, DC connectors and AC module mount.Orders only with other enphase components

Q-Cable round AC Branch Terminator (1 Item)#1: EN-Q-TERM-3P Accessories - Cable termination capsEnphase round Q Cable Terminator cap for unused cable ends - required to terminate each circuit. Single item only.

Racky Rax Cabinet 12U 550D - Black #2: RR-W2-12-G Racky Rax 12 Data Sheet Racky Rax 12 Manual This cabinet is suitable for housing of up to:5 x Pylontech US2000B Plus Lithium-Ion batteriesor3x Pylontech US3000 Lithium-Ion batteriesor3x Fox ESS HV2600 Lithium-Ion batteriesDimensions assembled - W 550mm X D 550 mm X H 615mm. Each cabinet comprises a welded steel frame and adjustable front and rear mounting profiles. The cabinets feature ventilation slots in the top, have a lockable glass front door, and removable sides. The cabinet is finished in a high quality attractive black. Batteries need to be attached using front battery mounting holes only.Ready assembled

Racky Rax battery Cabinet 9U 550D - Black #2: RR-W2-9-G Racky Rax 9 Data Sheet Racky Rax 9 Manual   This cabinet is suitable for housing of up to:4 x Pylontech US2000B Plus Lithium-Ion batteriesor2x Pylontech US3000 Lithium-Ion batteriesDimensions assembled - W 550mm X D 550 mm X H 455mm. Each cabinet comprises a welded steel frame and adjustable front and rear 19â€_x009d_ mounting profiles. The cabinets feature ventilation slots in the top, have a lockable glass front door, and removable sides. The cabinet is finished in a high quality attractive black. Batteries need to be attached using front battery mounting holes only. Ready assembled  

Red & Black 25mm2 Battery Cable set price per 1.5 meter 2: BATCAB25-1.5M-PAIR This part is made up of the following items:1 x BATCAB25-1.5M-RED 25mm2 Battery Cable (H01N2-D) 1.5m - Red 1 x BATCAB25-1.5M 25mm2 Battery Cable (H01N2-D) 1.5m - Black

Red & Black 25mm2 Battery Cable set price per 1.5 meter 2: BATCAB25-1.5M-PAIR This part is made up of the following items:1 x BATCAB25-1.5M-RED 25mm2 Battery Cable (H01N2-D) 1.5m - Red 1 x BATCAB25-1.5M 25mm2 Battery Cable (H01N2-D) 1.5m - Black

Red & Black 35mm2 Battery Cable set price per 1 meter 2: BATCAB35-1M-PAIR This part is made up of the following items:1 x BATCAB35-1M-RED 35mm2 Battery Cable (H01N2-D) 1m - Red 1 x BATCAB35-1M 35mm2 Battery Cable (H01N2-D) 1m - Black   

Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm#2: REN-520075-K#3: 2089 Renusol Brochure Renusol Datasheet Minimum order - 4 For panels of more than 1014mm width the elongation rails are required. Renusol Console+ 5200 75 KThe ConSole+ provides an angle of 15 degrees.The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+.The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.Details:- Colour: black- Suitable for flat-roof- and ground mounting installations- For framed PV-modulesTechnical Data:- Material: HDPE, Aluminium and stainless steel- Max module length: 1550-2150 mm- Holes gap - width: 895-1014 mm- Holes gap - length: 690-1180 mmOther Contents:- 1 x 500075 ConSole+- 2 x 400005 ConSole U-Profile 1035 mm- 4 x 900027 Hexag# screw DIN933-M6x20 A2-70- 4 x 900028 Washer DIN9021-6,4-A2- 4 x 900029 Self-locking hexag# nut DIN985-M6-A2- 4 x 900106 ConSole Clip- 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8

S1000 Power Optimiser Long Input (1.3m) #3: S1000-MC4 Inverters - Optimisers SE S1000 Optimiser Datasheet Minimum order: 4 Units   S1000 Power Optimizer Specifically designed to work with SolarEdge Comercial inverters Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading Faster installations with simplified cable management and easy assembly using a single bolt Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%)   Weight: 1.09 kgMin PPT Voltage: 12 VMax PPT Voltage: 125 VDC Startup Voltage: 12 VDC Shutdown Voltage: 125 VMax Input Voltage: 125 VMax DC Power: 1,000 WMax DC Current: 15 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 2MPPT Quantity : 1Has Integrated DC Switch: No