Products (874)

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Aylesbury had space for 16 x Jinko 430w and his preferred inverter system was Victron. System spec: 16 x Jinko 430w Tiger Neo Victron SmartSolar MPPT 250/60-Tr Victron MultiPlus-II 48/3000/35-32 230V

Aiko Stellar 1N+ 645W N-Type ABC, 72 Cell, Silver Frame, Dual Glass #2: AIK-G-MCH72-645-SF-DG  Panels - Monocrystalline   Aiko 645W Datasheet Aiko 645W Installation Manual  MCS Certification    Aiko 645W Warranty Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 5 panels. For orders with no minimum please visit our Single Panels page. Delivery Due to the panel size and gap between the slats of the pallets either a fork lift truck is required on-site to offload these modules or they need to be hand lifted off by the customer. Aiko Stellar 1N+ N-Type ABC, 72 Cell, Silver Frame, Dual Glass A commercial panel with a very high efficiency of 23.9% giving investors a faster ROI. The series is also aesthetically pleasing with an elegant design. Two unique advantages over any other panels yet on the market: Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc. Features Winner of 2023 intersolar innovation award, Winner of 2023 Red dot design award and 2024 ESG transparency No.1 efficiency in the market Cell-level partial shade optimisation (one and only in the industry) High temperature restriction for fire safety Micro-crack resistance Better temperature coefficient at -0.26 (best in CEA PV Tech lab test report) Elegant no-busbar look Product Warranty: 15 Years Performance Warranty: 30 Years Specs Weight: 33.5kg Dimensions: 2,382 L x 1,134 W x 30 D (mm) VMPP: 45.2 V IMPP: 14.27 A Isc: 15 A Voc: 53.9 V Temp. Coefficient (Mpp): -0.26% Cable Length: 1.4m  Connector: MC4 EVO2 Clamp position on panel: Long side only Connector Type: EVO2 Efficiency: 23.9% Pallet Size: Oversized    

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in St Saviours with space for 50 x Nulok roofing in-roof system. System spec: 50 x 120W in-roof Nulok roofing system solar panels 2 x Sunsynk 3.6kw hybrid

6mm2 single-core DC cable 25m - Black #2: CABLE6-1-25 Cables - DC Cables 25m solar cable with length label These Solar DC Cables are specifically for Photovoltaic (PV) systems, in particular those installed at Direct Current (DC) with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. Manufactured against the latest European Standard (EN 50618). The harmonised designation (H1Z2Z2-K, EN 50618) requires cables to be low smoke zero halogen and flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. (H1Z2Z2-K supersedes the previous TÃœV approved PV1-F cable.) Features H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor Flexible tinned copper (Class 5) Insulation Halogen-free cross-linked compound Outersheath Halogen-free cross-linked flame retardant compound Specs Weight: 1.87 kgLength: 25 mArea: 6 mm2Colour: BlackCores: 1 - NMax Current: 41Max Voltage: 1,800

6mm2 single-core DC solar cable 50m - Black #1: CABLE6-1-100 Cables - DC Cables 6 mm single-core, black, 100m 100m solar cable with length label Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up toï ¿ ½1.5kVï ¿ ½between conductors as well as between conductor and earth, and not exceedingï ¿ ½1800V.ï ¿ ½EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous Tï ¿ ½V approved PV1-F cable.

6mm2 single-core DC solar cable 50m - Black #1:CABLE6-1-250 Cables - DC Cables 250m solar cable with length label. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÆ’Å“V approved PV1-F cable.H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTIONConductor Flexible tinned copper (Class 5)Insulation Halogen-free cross-linked compoundOutersheath Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.

6mm2 single-core DC solar cable 50m - Black #1:CABLE6-1-500 Cables - DC Cables 6 mm ², single-core, black, 500m 500m solar cable with length label. Supplied on a reusable spool. Conductor cross-section: 6 mm ² (this is not the cable diameter, but rather the cross-sectional area). System voltage: 1800 V Rated current: 70 A according to DIN VDE 0298 part 4 Operating temperature range: -40 - 120 °C Solar cable, high temperature and UV-resistant, reliable for inside and outside use. Resistant to ammonia, ozone, mineral oil and acid. Excellent fire-resistance. Colour: Black It's important to choose the correct cable spec for your project. We can provide assistance with this if needed.

6mm2 single-core DC solar cable 50m - Black #1:CABLE6-1-50 Cables - DC Cables APPLICATION -Updated harmonised (H1Z2Z2-K) European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. -Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. -Our solar cable is ozone-resistant according to BS EN 50396, UV resistant according to HD 605/A1, and is tested for durability according to EN 60216.

6mm2 Two Core DC Cable 50m - Red and Black #2: DC-PV-ULTRA2C6.0-50 Cables - DC Cables PV-Ultra - Double Insulated Multicore DC Cable The PV-Ultra cable is engineered for excellence in solar photovoltaic systems, offering a robust solution for DC interconnections. Its superior mechanical properties ensure it can be deployed both inside and outside, showcasing versatility. Made from premium materials, this cable is built to last, with an anticipated lifespan of up to 25 years. It is capable of functioning at a peak conductor temperature of 90 °C, and can withstand temperatures up to 120 °C for as long as 20,000 hours, in environments reaching up to 90 °C. This durability and performance make the PV-Ultra an ideal choice for reliable, long-term solar installations. Features and Benefits Easier to handle and identify Saves installation costs and installation time Easier to route along/through buildings or walls Gives a cleaner, neater installation Safer as it removes the need for junction boxes Safer as it looks like a power cable to reduces the risk of accidental damage Pre-marked ‘LIVE DC’ warning message to improve safety Current carrying capacities based on ambient temperature of 60 °C , for temperatures above 60 °C temperature derating factors should be applied as follows 70 °C=0.91, 80 °C=0.82, 90 °C=0.71. Refer to BS7671 for further guidance. Supplier Part No: PV-ULTRA2C6.0.50MWeight: 20.24 kgLength: 50 mArea: 6 mm2Colour: Red and BlackCores: 2 - NMax Current: 67Max Voltage: 1,800

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Maldon with space for 18 x 415W JA Solar panels required around 15kWh of battery storage to meet his requirements. System spec: 18 x 415W JA Solar panels 3 x 3.5kWh US3000C Pylontech batteries 1 x 4.8kWh US5000 Pylontech batteries

7.52kw Solar & EcoFlow 6kw hybrid with 10kWh batteries (This is an example of one of our installations, this system is not actually available for free so please do not purchase) This is a showcase of one of our installations in Aylesbury. The customer had space for 16 x Aiko 470w and went for 10kWh of battery storage paired with a powerful 6kWh hybrid inverter. The EcoFlow 6kW hybrid inverter was the perfect choice, supported by three 5kWh lithium batteries. System specifications: 16 x 470w AIKO EcoFlow 6kW hybrid inverter 2 x 5kWh lithium batteries Bird protection Please note, this system is not available for purchase.

7.52kw AIKO solar panels GSE in-roof Solar & 20kWh batteries (This is an example of one of our installations, this system is not actually available for free so please do not purchase) This is a showcase of one of our installations in Wakefield. The customer had space for 16 x Aiko 470w and went for 20kWh of battery storage paired with a powerful 8kWh Sunsynk hybrid inverter.  System specifications: 16 x 470w AIKO GSE in-roof Sunsynk 8kW hybrid inverter 2 x 10.24kWh GSE lithium batteries Bird protection Please note, this system is not available for purchase.

7.73kW Solar with Givenergy All In One 13.5kWh Battery in NW9 9LN This installation example showcases a 7.73kW solar system in London, featuring 17 x 455w Aiko all black panels, a Fox inverter, and a Givenergy All In One 13.5kWh battery. The system includes Tigo optimisers and a Zappi EV charger for enhanced functionality. 9 x 455w Aiko all black panels Fox 6kW inverter Givenergy AIO battery system Tigo optimisers Zappi EV charger Experience sustainable energy with this advanced solar and battery setup.

50kW Synergy Manager SWITCH DC Switch, MC4, DC SPD #1: SE-50000-SWITCH-FULL Inverters - Main Units SolarEdge 50kW Datasheet SolarEdge 50kW Manual SolarEdge 50kW Warranty *Collections are not permitted due to health & safety regulations* Three Phase Synergy Inverter Main Features: Pre-commissioning feature for automated validation of system components and wiring during the site installation process and prior to grid connection. Easy 2-person installation with lightweight, modular design (each inverter consists of 2 or 3 Synergy Units and one Synergy Manager). Independent operation of each Synergy Unit enables higher uptime and easy serviceability. Built-in thermal sensors detect faulty wiring ensuring enhanced protection and safety. Built-in arc fault protection and optional rapid shutdown (depending on Synergy Manager used) Built-in PID mitigation for maximized system performance. Monitored and field-replaceable surge protection devices: integrated RS485 and Type 2 DC SPDs, optional Type 2 AC SPD. Integrated DC safety switch eliminates the need for external DC isolators. Weight: 82 kgRated Power: 50,000 WMin PPT Voltage: 0 VMax PPT Voltage: 0 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 1,000 VMax DC Power: 0 WMax AC Power (5 Minutes): 49,990 WSurge AC Power (1 Second): 49,990 WMax DC Current: 72.5 AMax DC Inputs: 0Has DC Fuses: 12Connector: MC4Included Connectors: 12Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years

75Wp Miasole Peel-and-Stick Flexible Solar Panel - 5 year warranty #17: 75Wp Miasole Peel-and-Stick Flexible Solar Panel - 5 year warranty   75W Datasheet Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 1 panel.   *Collections are not permitted due to health & safety regulations*   With the highest power density in a flexible form factor, these 3rd Generation Miasole CIGS flexible and lightweight modules are designed for narrowboats, RVs, motorhomes and yachts. With an unusually high energy yield due to excellent shadow tolerance and temperature stability, these panels give a good option for low narrowboat decks or hot motorhome roofs. These panels can also be used on metal 'standing-seam' roofs to provide power to buildings, either in off-grid environments, or grid-connected ones using a suitable inverter. The incredibly low profile and discreet colour means that you will hardly even notice the panels are there, yet they will churn out power for years with no maintenance at all - a superb bit of kit! Features: Record efficiency levels - with CIGS fully flexible solar cells (>16% cell efficiency) Lightweight - low installed weight at less than 2.9kg/m3 Full back-side adhesive tape - no requirement to bolt, ballast or drill holes More Bypass Diodes - placing these between every two cells reduces PV system shading losses Superior Wind resistance - low lying and sticks flush to roofs and decks   With the highest power density in a flexible form factor, these 3rd Generation Miasole CIGS flexible and lightweight modules are designed for narrowboats, RVs, motorhomes and yachts. With an unusually high energy yield due to excellent shadow tolerance and temperature stability, these panels give a good option for low narrowboat decks or hot motorhome roofs.  These panels can also be used on metal 'standing-seam' roofs to provide power to buildings, either in off-grid environments, or grid-connected ones using a suitable inverter. The incredibly low profile and discreet colour means that you will hardly even notice the panels are there, yet they will churn out power for years with no maintenance at all - a superb bit of kit! Features: Record efficiency levels - with CIGS fully flexible solar cells (>16% cell efficiency) Lightweight - low installed weight at less than 2.9kg/m3 Full back-side adhesive tape - no requirement to bolt, ballast or drill holes More Bypass Diodes - placing these between every two cells reduces PV system shading losses Superior Wind resistance - low lying and sticks flush to roofs and decks   ElectricalPeak power:  75W (-0/+5%)Vmpp: 18.8VVoc: 23.7VImpp: 4.0AIsc: 4.70A   System Weight: 1.3 kg Dimensions: 1710 x 348 x 2.5mm Max System Voltage: 1000V DC Cell Type: Copper Indium Gallium Diselenide (CIGS) Product warranty: 5 years Warranty on output: 80% 25 years    

8,000W StorEdge Hybrid Inverter 48V - Three Phase #1: SE-8000-3PH-RWS Storage Systems - Hybrid Inverter StorEdge 10kWh Data Sheet StorEdge 10kWh Manual SolarEdge G99 Certificate SolarEdge Warranty *Collections are not permitted due to health & safety regulations* 48V StorEdge Three Phase Inverter SE5K-RWS / SE7K-RWS / SE8K-RWS / SE10K-RWS 3Phase PV Hybrid inverter, ideal solution for three phase installations with Low Voltage 48V Li-Ion batteries Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Please note that unlike standard 1phase Solar Edge StorEdge devices, this 3phase inverter only works with Low Voltage 48V batteries! Weight: 37 kgRated Power: 8,000 WMin PPT Voltage: 750 VMax PPT Voltage: 900 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 900 VMax DC Power: 10,800 WMax AC Power (5 Minutes): 8,001 WSurge AC Power (1 Second): 8,002 WMax DC Current: 13.5 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 4Euro Efficiency: 97.6 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years