Newest Products (866)

GivEnergy Single Phase Energy Meter with CT #1: GIV-GM120CT #3: 3044 #4: GIV-GEM120CT GivEnergy Energy Meter Data Sheet This GIV-GM120CT meter is an ID1 meter only and cannot be reprogrammed for ID2 or ID3. If an ID2 or ID3 meter is required, please instead order part number GIV-GM120CT-P which is programmable for different ID adresses. 45/100 = 45A In-Line connected meter with a 100A CT Protection Class IP51 Dimensions (HxWxD) 119 x 17.5 x 62mm

Enphase Q-Relay for IQ7/IQ7+ Three Phase #1: Q-RELAY-3P-INT In Enphase installations, the three-phase Q Relay (network system relay controller) acts as a galvanic disconnection device. It is designed for single phase use and has built in contactors. During specified grid abnormalities, the Q Relay disconnects the Enphase Microinverters from the AC grid, and when the voltages return to normal and the grid frequency is in the acceptable range, the Q Relay reconnects the microinverters to the AC grid. The Q Relay has built in current sensing that can detect DC current injection required by VDE V 0126-1-1 requirements. The Q Relay works together with the Envoy-S to meet the need to break both line and neutral per grid requirements. See full installation instructions for the Enphase Envoy-S and/or Enphase Microinverters at: enphase.com/support. It is best practice to install the Q Relay when installing the Envoy-S and before commissioning the system. The Q relay is IP-20 rated. You must mount it in an environmentally protected enclosure. Only available to purchase together with Microinverters.

Enphase Q Cable Sealing Caps #1: EN-Q-SEAL Enphase Q Cable Sealing Caps (1 Item)Q cable sealing caps (female) One needed to cover each unused connector on the cabling. Single item only. Only available to purchase together with Microinverters.

20 Enphase Q Cable 3ph 1m Portrait#1: EN-Q-25-10-3P-1 Enphase Q Cable 3ph 1m Portrait (price per connector) Only available to purchase together with Microinverters.

Solis Inverter 110kW Three Phase 5G PRO #1: SOL-110K-5G-PRO-DC #4: Solis-110K-5G-PRO   Solis 110K Data Sheet Solis 110K Manual Solis 110K G99 Certificate   *Collections are not permitted due to health & safety regulations* Rating: 110,000W Phases: 3 Efficient: 6/8 MPPTs, max. efficiency 98.5% 150% DC/AC ratio Compatible with bifacial modules Safe IP66 AFCI protection, proactively reduces fire risk Globally recognised branded componentry for longer life Smart Night SVG function Intelligent string monitoring, smart I-V curve scan Remote firmware upgrade with simple operation Economic Power line communication (PLC) (optional) DC side supports "Y" connector Supports aluminium wire access to reduce cost Note: Pro 5G Solis 100kW come with integrated DC isolators but not the AC option - AC Isolator is required   Weight: 93 kgRated Power: 110,000 WMin PPT Voltage: 160 VMax PPT Voltage: 1,000 VDC Startup Voltage: 180 VDC Shutdown Voltage: 160 VMax Input Voltage: 11,000 VMax DC Power: 110,000 WMax AC Power (5 Minutes): 110,000 WSurge AC Power (1 Second): 121,000 WMax DC Current: 272 AMax DC Inputs: 16Has DC Fuses: 0Connector: MC4Included Connectors: 32Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 16Has Integrated DC Switch: YesWarranty: 5 years

Solis 100kW Three Phase 5G PRO Inverters #1: SOL-100K-5G-PRO-DC #4: Solis-100K-5G-PRO Solis 100K Data Sheet Solis 100K Manual Solis 100K G99 Certificate *Collections are not permitted due to health & safety regulations* Rating: 100,000W Phases: 3 SOL-100K-5G-PRO Efficient: 6/8 MPPTs, max. efficiency 98.5% 150% DC/AC ratio Compatible with bifacial modules Safe IP66 AFCI protection, proactively reduces fire risk Globally recognised branded componentry for longer life Smart Night SVG function Intelligent string monitoring, smart I-V curve scan Remote firmware upgrade with simple operation Economic Power line communication (PLC) (optional) DC side supports "Y" connector Supports aluminium wire access to reduce cost Note: Pro 5G Solis 100kW come with integrated DC isolators but not the AC option - AC Isolator is required Weight: 93 kgRated Power: 100,000 WMin PPT Voltage: 160 VMax PPT Voltage: 1,000 VDC Startup Voltage: 180 VDC Shutdown Voltage: 160 VMax Input Voltage: 1,100 VMax DC Power: 100,000 WMax AC Power (5 Minutes): 100,000 WSurge AC Power (1 Second): 110,000 WMax DC Current: 272 AMax DC Inputs: 16Has DC Fuses: 0Connector: MC4Included Connectors: 32Euro Efficiency: 98 %Transformer: NoneMPPT Quantity : 16Has Integrated DC Switch: YesWarranty: 5 years

StorEdge HD Wave 5000W AC Coupled inverter NO DISPLAY #2: SE-5000H-APP-AC #4: SE5000H-RWSACBNN4 SolarEdge 5000W Data Sheet SolarEdge 5000W Manual SolarEdge 5000W Warranty SolarEdge 5000W G99 Certificate *Collections are not permitted due to health & safety regulations* AC coupled storage inverter with HD-Wave Technology and SetAPP This inverter can be used directly with SolarEdge Energy Bank or with LG Chem RESU High Voltage battery when combined with StorEdge Interface STI-S4. SolarEdge energy meter and a suitable CT are required for the correct operation of the system. - - AC coupling means it’s perfectly suited for sites with 1. Three-phase SolarEdge PV inverters and 2. Non-SolarEdge PV inverters or 3. No PV at all. - Monitor battery status, PV inverter production, and self-consumption data for full visibility - IP65 – Outdoor and indoor installation

430W SunPower Maxeon 3 mono/white Module 40mm Solar Panel #5: SPWR-MAX3-430W SunPower 430W Data Sheet SunPower 430W Manual SunPower 430W Warranty Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 6 panels. For orders with no minimum please visit our Single Panels page. Other panels have a minimum order of 3 - 5 panels. *Collections are not permitted due to health & safety regulations* SunPower Maxeon 3 430W More Lifetime Energy Designed to maximise energy generation through leading efficiency, enhanced performance in high temperatures, and higher energy conversion in low-light conditions like mornings, evenings and cloudy days. Uncompromising Durability Engineered to power thro More Lifetime EnergyDesigned to maximise energy generation through leading efficiency, enhancedperformance in high temperatures, and higher energy conversion in low-lightconditions like mornings, evenings and cloudy days. Uncompromising DurabilityEngineered to power through all types of weather conditions with crackresistantcells and reinforced connections that protect against fatigueand corrosion, to an electrical architecture that mitigates the impact ofshade and prevents hot-spot formation. Superior SustainabilityClean ingredients, responsible manufacturing, and lasting energy production for40 years make SunPower Maxeon panels the most sustainable choice in solar.The Industry's Longest WarrantySunPower Maxeon panels are covered by a 40-year warranty backed by extensive third-party testing and field data from more than 33 million panels deployed worldwide. Product and power coverage 40 Years Year 1 minimum warranted output 98.0% Maximum annual degradation 0.25% Up to 22.7% Efficient Specifications: Power Rating: 430W - Length: 1812mm Width: 1046mm Depth: 40mm- Weight: 21.2 kg- VMPP: 70.4 V- IMPP: 6.11 A- Voc: 81.4 V- Operating Temperature: -40c to 85c- Efficiency: 22.7%Product Warranty: 40 Years   430w sunpower solar panels from ITS Technologies.  No.1 Supplier for Solar Panels & complete solar PV systems.   

Zappi V2.1 Eco-smart EV Charge Point (inbuilt Wifi) 22kW 3PH Type 2 Tethered White with Tamper Kit #2: MYEN-ZAPPI-2H22TW-PACK #3: 4804#5052 New version with tamper kit for new UK regulations Zappi Type 2 Data Sheet Zappi Type 2 User Manual Zappi Type 2 Declaration of Conformity To be OLEV Smart compliant an additional hub is required.*Collections are not permitted due to health & safety regulations* For energy harvesting wireless sensor: Myenergi Harvi Charge your EV with your PV! Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. For use with 3-phase mains supply Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty myenergi Retrofit Tamper Kit Included

Solis inverter 20kW S5 3 Phase Dual MPPT - DC #2: SOL-S5-GR3P-20K-DC #4: S5-GR3P20K-DC Solis 20kW Data Sheet Solis 20kW Manual Solis Inverter 20kW Warranty Solis 20kW G100 Certification *Collections are not permitted due to health & safety regulations* For additional 5 year warranty - click here. Rating: 20,000WPhases: 3Series 5 GR3P Three Phase Grid-Tied InverterProduct Features: Max. efficiency of 98.7% Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V 16A PV string input x 4 Maximum AC output power of 22kW Max PV DC Power of 30kW Integrated AFCI (DC arc-fault circuit protection) IP66 Rated DC reverse-polarity protection 5-year standard warranty Register on SolisCloud, to support remote upgrade and control.NRS-097-2-1 CertifiedWeight: 22.94 kgRated Power: 20,000 WMin PPT Voltage: 180 VMax PPT Voltage: 1,000 VDC Startup Voltage: 180 VDC Shutdown Voltage: 160 VMax Input Voltage: 1,100 VMax DC Power: 30,000 WMax AC Power (5 Minutes): 22,000 WSurge AC Power (1 Second): 22,000 WMax DC Current: 64 AMax DC Inputs: 4Has DC Fuses: 0Connector: MC4Included Connectors: 8Euro Efficiency: 98.1 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: YesWarranty: 5 years

Eco-smart Single Phase EV Charge Point 7kW Untethered Black with Tamper Kit #1: MYEN-ZAPPI-2H07UB-PACK #3: 4850#5060 Zappi 7kW 3ph Data Sheet Zappi 7kW 3ph User Manual Zappi Declaration of Conformity *Collections are not permitted due to health & safety regulations* For energy harvesting wireless sensor: Myenergi Harvi Eco-smart EV Charge Point 22kW 3PH Untethered Black with Tamper Kit Has three charging modes: ECO, ECO+ and Fast. ECO settings use solar or wind energy intergrated with grid power. In Fast mode zappi operates like any other mains powered EV charger. myenergi Retrofit Tamper Kit Included Key Features Optimises microgeneration self-consumption Works with solar PV or wind turbine systems Economy tariff sense input Dynamic load balancing Charge and event logging PIN code lock function OLEV (home/work) scheme approved Built-in RCD protection and earth fault detection - no earth rod required Works alongside battery storage 3 year warranty

SMA Sunny Tripower X 50kW Solar Inverter - Three Phase #4: STP50-41 SMA 50kW Data Sheet SMA 50kW Manual SMA 50kW Warranty *Collections are not permitted due to health & safety regulations* The new Sunny Tripower X is the innovative system solution for commercial and large home PV systems. The integrated System Manager function with direct access to Sunny Portal powered by ennexOS monitors up to five SMA inverters and one energy meter. Thanks to the wide input voltage range and the high input current capability, it is compatible with the latest generation of high-performance PV modules. The innovative enclosure design ensures efficient cooling of the electronic components and thus guarantees maximum lifetime of the Sunny Tripower X. Commissioning can be performed quickly and easily as well as centrally for all devices in the system. During operation, users benefit from integrated software solutions: SMA ShadeFix increases PV yields even in the event of partial shading, while SMA ArcFix detects electric arcs effectively and can reliably reduce the risk of fire. Manufacturer: SMA Solar Phases: 3 Phase Power Rating: 50kW Inverter Type: String Inverter Built in DC: Yes No. of MPPT: 3 Built in Communication: Integrated Off-Grid Compatible: Yes Dimensions (mm): (H x W x D) 728 x 762 x 266

Huawei Backup Box B1 for Three Phase Systems #1: HUA-BACKUP-BOX-B1 Backup Box Data Sheet Backup Box Manual Backup Box Warranty *Collections are not permitted due to health & safety regulations* Huawei's Backup Box provides automatic detection & switchover providing reliable backup power. The Backup Box is used in a residential rooftop PV plant system to control the inverter grid-tied or off-grid state. When the grid fails, the inverter switches to the off-grid state and supplies power to off-grid loads in backup mode. When the grid recovers, the inverter switches back to the grid-tied state. The Box is compatible with the following Huawei Inverters: SUN2000-3/4/5/6/8/10KTL-M1

Backup Box B0 for 1ph System #1: HUA-BACKUP-BOX-B0 Backup Box Data Sheet Backup Box Manual Backup Box Warranty *Collections are not permitted due to health & safety regulations* Huawei's Backup Box provides automatic detection & switchover providing reliable backup power.It's used in a residential rooftop PV system to control the inverter, grid-tied or off-grid. When the grid fails, the inverter switches to the off-grid state and supplies power to off-grid loads in backup mode. When the grid recovers, the inverter switches back to the grid-tied state.The Box is compatible with the following Huawei Inverters: SUN2000-2/3/3.68/4/4.6/5/6KTL-L1

SMA Sunny Tripower X 20kW Solar Inverter - Three Phase #4: STP20-50 *Collections are not permitted due to health & safety regulations* The new Sunny Tripower X is the innovative system solution for commercial and large home PV systems. The integrated System Manager function with direct access to Sunny Portal powered by ennexOS monitors up to five SMA inverters and one energy meter. Thanks to the wide input voltage range and the high input current capability, it is compatible with the latest generation of high-performance PV modules. The innovative enclosure design ensures efficient cooling of the electronic components and thus guarantees maximum lifetime of the Sunny Tripower X. Commissioning can be performed quickly and easily as well as centrally for all devices in the system. During operation, users benefit from integrated software solutions: SMA ShadeFix increases PV yields even in the event of partial shading, while SMA ArcFix detects electric arcs effectively and can reliably reduce the risk of fire. Manufacturer: SMA Solar Phases: 3 Phase Power Rating: 20 kW Inverter Type: String Inverter Built in DC: Yes No. of MPPT: 3 Built in Communication: Integrated Off-Grid Compatible: Yes Dimensions (mm): (H x W x D) 728 x 762 x 266

SolarEdge 2200W Home Wave Inverter - Single Phase Network Ready #1: SE-2200H-NET #4: SE2200H-RW000BEN4 SolarEdge 2200W Data Sheet SolarEdge 2200W Manual SolarEdge 2200W Warranty SolarEdge 2200W G99 Certificate *Collections are not permitted due to health & safety regulations*Rating: 2,200WPhases: 1SolarEdge Home Wave Inverter- Network ReadyOptimized Installation With HD-Wave Technology Features: Specifically designed to work with SolarEdge Power Optimizers Quick and easy inverter commissioning directly from a smartphone using the SolarEdge SetApp Industry leading efficiency with 200% DC oversizing Seamless wireless connectivity with system devices such as the SolarEdge Home Battery, via optional SolarEdge Home Network platform Extremely compact, lightweight and easy to install Built-in module-level monitoring Suitable for outdoor and indoor installation Fixed voltage inverter for longer strings Advanced safety feature - integrated arc fault protection Supplier Part No: SE2200H-RW000BEN4Weight: 7.8 kgRated Power: 2,200 WMin PPT Voltage: 0 VMax PPT Voltage: 0 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 480 VMax DC Power: 4,400 WMax AC Power (5 Minutes): 2,200 WSurge AC Power (1 Second): 2,201 WMax DC Current: 6.5 AMax DC Inputs: 1Has DC Fuses: 0Connector: MC4Included Connectors: 2Euro Efficiency: 98.3 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years