Newest Products (865)

SolaX X1 Fit AC Coupled Battery charger Inverter HV 5.0kW #2: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter #3: 4614 Sola X1 RetroFit Inverter Data Sheet Solax X1 RetroFit Inverter User Manual Solax X1 RetroFit Inverter Warranty Solax X1 RetroFit G99 Certification Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here. *Collections are not permitted due to health & safety regulations* Full list of SolaX products X1 RetroFit AC Charger Upgrade a PV system with the X1 RetroFit AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud. Additional features: High voltage battery support means thinner cables are required 6kW Max charge/discharge Wifi or LAN stick available separately Suitable for grid trading applications with less than 0.5s response time Charging from grid possible Natural Cooling, quiet and low maintenance Please note the minimum number of Solax batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter. UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. A LOT BETTER VALUE IF BOUGHT AS A PACKAGE BELOW!

SMA Sunny Tripower 10kW AV40 Three Phase Inverter #4: STP10.0-3AV-40 *Collections are not permitted due to health & safety regulations* Part No: STP10.0-3AV-40 Inverters - Main Units Rating: 10,000W Phases: 3 SUNNY TRIPOWER 3.0 / 4.0 / 5.0 / 6.0 Higher yields for private homes — intelligent solar power generationThe new Sunny Tripower 3.0–6.0 ensures maximum energy yields for private homes. This inverter combines the integrated SMA Smart Connected service and intelligent technology for all ambient requirements. Thanks to its extremely light design, the device can be installed quickly and easily. The Sunny Tripower can be commissioned quickly via smartphone or tablet thanks to its integrated web interface. For specific requirements on the roof, such as shading, the TS4-R module optimizers can be added into the system, with all communication and monitoring facilitated through the inverter. Current communication standards make the inverter future-proof, meaning intelligent energy management solutions as well as SMA storage solutions can be flexibly added anytime. Please note the following documents are currently missing: EN50438 Ireland certificate These will be uploaded as soon as available from the Manufacturer.

Sunsynk Battery SUNSYNK-G5.3 #5: SUNSYNK-G5.3 #10: SUNSYNK-G5.3 G5.3 Datasheet G5.3 Wall Mounted manual G5.3 Rack Mounted Manual (Compatible with L5.3 and L5.1 models but not SUN-BAT-5.32 or CATL 5.12kwh) Sunsynk top-grade 5.32kWh Lithium-Ion Phosphate batteries (4.79kWh usable) have been engineered to the highest standard. They are capable of up to 90% depth of discharge and scalable with up to 32 units in parallel, allowing for a maximum of 170kWh per inverter. Sunsynk BMS (Battery Management System) also offers a quick paralleling function, so no dip switches are needed, making installation straightforward. The battery is 1C rated, meaning that it will be able to charge or discharge at the full 5.32kWh until it is depleted. This allows the end user to utilise the full potential of our inverter and battery systems. Included: Battery isolator Battery to inverter & Battery to battery cable Wall bracket TECHNICAL SPECIFICATION Battery chemistry: LiFePO4 Capacity (Ah): 104 Scalability: Max. 32 pcs in parallel (170.24kWh) Nominal voltage: 51.2V Energy: 5.32kWh Recommended depth of discharge: 90% Dimensions: 440 x 620 x 135mm (W x H x D) Weight: 46kg IP rating: IP65 Communication port: CAN2.0, RS485

Solis 50kW S5 3 Phase 5x MPPT - DC #1: SOL-S5-GC50K-DC #4: S5-GC50K-DC-PID Solis 50kW Data Sheet Solis 50kW Manual Solis 50kW Warranty Solis 50kW G99 Certificate Rating: 50,000W Phases: 3 Product Features: Max. efficiency of 98.7% Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 195V and max PV input voltage of 1100V Max PV DC Power of 75kW 32A input per MPPT, 16A input for each PV string Maximum output power of 55kW 5 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch Intelligent monitoring, Smart I-V Curve Diagnosis Integrated AFCI (DC arc-fault circuit protection) IP66 Rated and C5 Anti-Corrosion Level Integrated DC switch for emergency shut-down of PV power or safe PV maintenance DC reverse-polarity protection Supports PLC/GPRS/WiFi communication with less wiring and reduced installation costs 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. SA: NRS-097-2-1 Certified Weight: 54.5 kgRated Power: 50,000 WMin PPT Voltage: 195 VMax PPT Voltage: 1,000 VDC Startup Voltage: 195 VDC Shutdown Voltage: 180 VMax Input Voltage: 1,100 VMax DC Power: 75,000 WMax AC Power (5 Minutes): 55,000 WSurge AC Power (1 Second): 55,000 WMax DC Current: 160 AMax DC Inputs: 10Has DC Fuses: 0Connector: MC4Included Connectors: 20Euro Efficiency: 98.3 %Transformer: NoneMPPT Quantity : 5Has Integrated DC Switch: YesWarranty: 5 years

S1000 Power Optimiser Long Input (1.3m) #3: S1000-LI-MC4 Inverters - Optimisers SE S1000 Optimiser Datasheet Minimum order: 4 Units S1000 Power Optimizer Long Input (1.3m) Specifically designed to work with SolarEdge Comercial inverters Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading Faster installations with simplified cable management and easy assembly using a single bolt Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%)   Weight: 1.09 kgMin PPT Voltage: 12 VMax PPT Voltage: 125 VDC Startup Voltage: 12 VDC Shutdown Voltage: 125 VMax Input Voltage: 125 VMax DC Power: 1,000 WMax DC Current: 15 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 12MPPT Quantity : 1Has Integrated DC Switch: No  

Fox H1 3.7kW Hybrid Inverter 1PH G2 #2: FE-H1-3.7-G2 Storage Systems - Hybrid Inverter Fox H1 3.7kW Datasheet Fox H1 3.7kW Manual Fox H1 3.7kW Installer Guide Fox H1 3.7kW G100 Certification Fox Battery Sizing Guide *Collections are not permitted due to health & safety regulations* Features: Easy Install High Voltage IP65 Rated Remote Monitoring Dual MPPT - ensure optimal solar production High round-trip efficiency of 97% With this single phase Hybrid/AC Inverter you can easily expand your system with up to seven batteries in series, with a maximum storage capacity of 33.24kWh. Compatible with: ECS2900 (1 Master Minimum, up to 6 Slaves Maximum) ECS4100 (1 Master + 1 Slave Minimum, up to 6 Slaves Maximum) ECS4300 (1 Master + 1 Slave Minimum, up to 6 Slaves Maximum) ECS4800 (1 Master + 1 Slave Minimum, up to 6 Slaves Maximum) HV2600 (1 BMS + 2 HV2600 Minimum, up to 7 Maximum) Included: CT Clamps WiFi stick Still Required: a second CT if there's another generator set (i.e PV, wind or other). a meter between inverter and incoming power connection point IF distance is more than 30m apart. Compatibility: FoxESS inverters compatible with Tigo optimisers Fox ESS inverters are not compatible with SolarEdge or Huawei optimizers Specs: Weight: 22 kgRated Power: 3,680 WMin PPT Voltage: 80 VMax PPT Voltage: 550 VDC Startup Voltage: 75 VDC Shutdown Voltage: 600 VMax Input Voltage: 600 VMax DC Power (5 minutes): 5,500 WMax AC Power (5 Minutes): 3,680 WSurge AC Power (1 Second: 4,400 WMax DC Current: 32 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4 Included Connectors: 4Euro Efficiency: 95.7 %Transformer: NoneMPPT Quantity: 2Has Integrated DC Switch: YesWarranty: 5 years Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

Fox ECS HV ECM2900 Connector Type A, 5.76kWh 1x Master 1x Slave #1: FE-HV-EC-A-2-2.9-5.8 Please view our battery storage information page for sizing and selecting the right battery storage system for you. Fox ECS2900 Datasheet Fox ECS2900 Manual Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 1 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers. 2.88kWh Capacity Scalable to 20.16kWh 90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

Fox ECS HV ECM2900 Connector Type A, 8.64kWh 1x Master 2x Slave solar battery storage #1:FE-HV-EC-A-3-2.9-8.7 Please view our battery storage information page for sizing and selecting the right battery storage system for you. Fox ECS2900 Datasheet Fox ECS2900 Manual Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 2 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers. 2.88kWh Capacity Scalable to 20.16kWh 90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage   Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

Fox ECS HV ECM2900 Connector Type A,11.52kWh 1x Master 3x Slave #1:FE-HV-EC-A-4-2.9-11.6 Please view our battery storage information page for sizing and selecting the right battery storage system for you. Fox ECS2900 Datasheet Fox ECS2900 Manual Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 3 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers. 2.88kWh Capacity Scalable to 20.16kWh 90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

Fox ECS HV ECM2900 Connector Type A,14.4kWh 1x Master 4x Slave #1:FE-HV-EC-A-5-2.9-14.5 Please view our battery storage information page for sizing and selecting the right battery storage system for you. Fox ECS2900 Datasheet Fox ECS2900 Manual Fox ECS2900 Warranty *Collections are not permitted due to health & safety regulations* Suitable for charging from the grid such as Economy 7 & Octopus Go. For detailed explanation of how to maximise Economy 7 essential information to work out which battery storage options is best for you please visit - Understaning Economy 7 Compatible with Fox HV chargers only available on our Fox HV main page This product is made up of the following items:1 x FE-HV-ECM-2900-4A2C Fox ECS 2.88kWh HV Battery (Master)-V2.0 Connector A 4 x FE-HV-ECS-2900-4A2C Fox ECS 2.88kWh HV Battery (Slave)-V2.0 Connector A Energy cube is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, allowing for a maximum storage capacity of 20.16 kWh. Installation is easy, with a plug and play solution that can save valuable time for installers. 2.88kWh Capacity Scalable to 20.16kWh 90% Depth of Discharge Wide Temperature Tolerence Easy Installation CAN/RS485 Communication High Voltage Weight: 32.4 kgBattery Type: Lithium IonNominal Energy: 2880 WhDepth of discharge: 90.00 %Voltage: 52 VContinuous Discharge Rate (Normal Use): 1440 WMaximum Discharge Rate (5 Minutes): 2880 WSurge Discharge Rate (15 Seconds): 3000 WMaximum Charge Rate (5 Minutes): 2880 W

GivEnergy 3PH 11kW Hybrid Inverter#2: GIV-3HY-11.0-HV Storage Systems - Hybrid 3Phase Inverter#3: 5479 GivEnergy 3PH 11kW Hybrid Inverter Datasheet GivEnergy 3.PH 11kW Hybrid Inverter Installation Manual GivEnergy Portal Brochure GivEnergy App Brochure *Collections are not permitted due to health & safety regulations* This GivEnergy Hybrid Inverter, designed for three-phase systems, functions as both a battery and solar inverter within a single unit enabling AC and DC coupling of the battery. This integrated system connects with solar panels for immediate electricity generation, with surplus energy stored in the battery for future use. Features: Plug-and-play installationOn/off-grid phase balancingDischarge up to 11kW Phases: 3MPP Tracker: 2Inputs per Tracker: 1Rated AC power: 11 kWMPPT Voltage range: 200 - 850 VWarranty: 12 years Battery Compatibility: Battery connection for high-voltage battery (GivEnergy Battery only) Connectivity: WiFi included Meter: 3-PH smart meter not included Specs: Weight: 35 kgRated Power:11,000 WMin PPT Voltage:200 VMax PPT Voltage:850 VDC Startup Voltage:200 VDC Shutdown Voltage:200 VMax Input Voltage:1,000 VMax DC Power:30,000 WMax AC Power (5 Minutes):15,000 WSurge AC Power (1 Second):15,000 WMax DC Current:30 AMax DC Inputs:2Has DC Fuses:0Connector:MC4 Included Connectors:0Euro Efficiency:97 %Transformer:NoneMPPT Quantity :2Has Integrated DC Switch:NoEPS: 11 kW Emergency Power Supply Input current: 15 AShort-circuit input current: 20 A

Solis 30kW S5 3 Phase Triple MPPT - DC #2: SOL-S5-GC30K-DC Solis 30kw Data Sheet Solis 30kw User Manual Solis 30kw Warranty Solis 30kw G99 Certification *Collections are not permitted due to health & safety regulations* Part No: SOL-S5-GC30K-DC Inverters - Main Units Rating: 30,000W Phases: 3 S5-GC30K - Series 5 Three Phase Grid-Tied Inverter Product Features: Max. efficiency of 98.5% Type-II over-voltage surge protection for both DC and AC Wide voltage range - Ultra low start-up voltage of 180V and max PV input voltage of 1100V 32A input per MPPT, 16A input for each PV string Maximum AC output power of 33kW 3 MPPT design with precise MPPT algorithm, with 2 DC inputs per MPPT effectively reducing string mismatch Intelligent monitoring, Smart I-V Curve Diagnosis Integrated AFCI (DC arc-fault circuit protection) IP66 Rated DC reverse-polarity protection 5-year standard warranty Register on SolisCloud, to support remote upgrade and control. SA: NRS-097-2-1 Certified Weight: 44 kgRated Power: 30,000 WMin PPT Voltage: 200 VMax PPT Voltage: 1,000 VDC Startup Voltage: 200 VDC Shutdown Voltage: 180 VMax Input Voltage: 1,100 VMax DC Power: 45,000 WMax AC Power (5 Minutes): 33,000 WSurge AC Power (1 Second): 33,000 WMax DC Current: 96 AMax DC Inputs: 6Has DC Fuses: 0Connector: MC4Included Connectors: 12Euro Efficiency: 98.1 %Transformer: NoneMPPT Quantity : 3Has Integrated DC Switch: YesWarranty: 5 years

Growatt ML33RTA 3 Battery Cable Kit #3: 5178 *Collections are not permitted due to health & safety regulations* This ML33RTA 3 Battery Cable Kit is utilised for adding of ML33RTA batteries to the Growatt storage inverters. Please see the kit requirements below: 1 ML33RTA battery => 1 x Growatt ML33RTA 1 Battery Cable Kit 2 ML33RTA batteries => 1 x Growatt ML33RTA 2 Battery Cable Kit 3 ML33RTA batteries => 1 x Growatt ML33RTA 3 Battery Cable Kit 4 ML33RTA batteries => 1 x Growatt ML33RTA 3 Battery Cable Kit & 1 x Growatt ML33RTA 1 Battery Cable Kit 5 ML33RTA batteries => 1 x Growatt ML33RTA 3 Battery Cable Kit & 1 x Growatt ML33RTA 2 Battery Cable Kit 6 ML33RTA batteries => 2 x Growatt ML33RTA 3 Battery Cable Kit

SolarEdge 8kw Three Phase on grid 8,000W solar Inverter #1: SE-8000-3PH-NET Part No: SE-8000-3PH-NET Inverters - Main Units Rating: 8,000W Phases: 3 Solar Edge 8000 3phase inverter with Set APP function (no display) SE8K-RW0TEBNN4 THIS INVERTER HAS NO TRACKERS AND REQUIRES POWER OPTIMISERS TO FUNCTION. The SolarEdge inverters combine a sophisticated, digital control technology and a one stage, efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions. UK only: This inverter has been tested and certified according to G98 or G99, but only with the most recent Firmware version. Please update the inverter firmware during SetAPP phone app commissioning process as per the per Installation Manual. Please note: This inverter does not have a display.

SolarEdge 9000W Three Phase Inverter £1,418 +VAT #3: 531 *Collections are not permitted due to health & safety regulations* Part No: SE-9000-3PH-APP Inverters - Main Units Rating: 9,000W Phases: 3 Solar Edge 9000 3phase inverter with Set APP function (no display) SE9K-RW0TEBNN4 THIS INVERTER HAS NO TRACKERS AND REQUIRES POWER OPTIMISERS TO FUNCTION. The SolarEdge inverters combine a sophisticated, digital control technology and a one stage, efficient power conversion architecture to achieve superior solar power harvesting and best-in-class reliability. The fixed-voltage technology ensures the solar inverter is always working at its optimal input voltage, regardless of the number of modules in a string or environmental conditions.

500W JA Solar Integrated Traceable System Mono PERC Half-Cell MBB Silver Frame TS MC4 Connectors solar panel #2: JAM66S-30-500-MR-TS-MC4 JA Solar 500W Data Sheet JA Solar 500W Manual JA Solar 500W Warranty JA Solar 500W MCS Certificate Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 5 panels. For orders with no minimum please visit our Single Panels page. Other panels have a minimum order of 3 - 5 panels. *Collections are not permitted due to health & safety regulations* Rating: 500W Efficiency: 21.1% Width: 1,134mm Height: 2,093mm Frame Colour: Silver Back sheet: White Warranty (Product/Performance): 12/25 years Supplier Part No: JAM66S30-500/MRWeight: 26.3 kgRated Power: 500 WMCS Reference: BABT 8515-219-500WLength: 2,093 mmWidth: 1,134 mmDepth: 30 mmVMPP: 38.35 VIMPP: 13.04 AIsc: 13.93 AVoc: 45.59 VTemp. Coefficient (Mpp): -0.35 %Clamp position on panel: Long and short sideConnector Type: MC4Efficiency: 21.1 %Pallet Size: Oversized This panel is designed to serve those customers who need to know where the parts & materials used in the manufacturing of the products were sourced. Its components are fully traceable.