Newest Products (887)

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Ackworth with 9 x 420w Jinko all black panels installed in landscape with a solis inverter and Givenergy AIO battery system with 13.5kWh battery System spec: 9 x 420w Jinko all black Solis 3.6kW inverter Givenergy AIO battery system with 13.5kWh battery

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Shetland with Sunsynk 5kW ECCO hybrid connected to 3 x Sunsynk L5.3 5.32kWh batteries and an EDDI hot water diverter System spec: Sunsynk ECCO 5kW hybrid 3 x Sunsynk L5.3 5.32kWh batteries EDDI

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Lincolnshire with 8 x 405w JA Solar all black panels, Solis 5kW hybrid with 3 x Pylontech 4.8kW US5000 batteries. System spec: 8 x 405w JA Solar all black Solis 5kW hybrid 3 x Pylontech 4.8kW US5000 batteries

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Farnham Royal with 12 x 445w JA Jinko all black panels, Givenergy 5kW hybrid with 9.5kWh battery System spec: 12 x 445w Jinko all black Givenergy 5kW hybrid 9.5kWh battery 12 x Tigo optimisers Myenergi EDDI

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Cambridge wanted a Fox ESS battery system to charge from the gird at cheap night time rates and to run his air source heat pump. System spec: Fox ES 5kw AC charger 11.52kWh Fox Cube batteries

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer with a 3ph supply in Boston required around 30kWh of battery storage with a powerful hybrid inverter to meet his requirements. The ideal solution was going for 3 x Sunsynk 3.6kW Sunsynk hybrids with 3 x 10.24kWh GSL batteries. System spec: 3 x Sunsynk 3.6kw ECCO hybrid 3 x 10.24kWh GSL lithium batteries

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Grimsby required around 20kWh of battery storage and opted for the GSL All In oNe system System spec: GSL Al lIn One 5.5kw hybrid with 2 x 10.24kWh batteries

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Sutton wanted a Fox ESS battery system to charge from the gird at cheap night time rates. System spec: Fox ES 5kw AC charger 7 x 2.6kWh Fox HV2600 batteries

SolaX 5kW G4-V2 Hybrid inverter with Wi-Fi #2:X1-HYBRID-G4-5.0-V2 SolaX 5.0kW Data Sheet SolaX 5.0kW Manual SolaX 5.0kW Warranty SolaX 3.7kW G99 Certificate For a full list of SolaX products click here. *Collections are not permitted due to health & safety regulations* G4 HV Single Phase Hybrid Inverter And Charge Controller This is the fourth generation of SolaX Hybrid/AC Charge controller inverters to be released into the market, retaining all the key features of the 3rd generation ranges, incorporating some new enhancements. Additional features of the G4 range include; Supports up to 150% Oversizing The new G4 range allows for greater oversizing in comparison to previous generations meaning you can maximise the amount of connected PV ensuring the system is always producing the maximum amount. High reliability Performs well in harsh environments -Passed the HALT test -Tested to extreme high and low temperatures -Salt spray tested -Aging test with full working load. 30 Min installation Faster and easier installation reduces the time spent on site. Fast Charging speeds The G4 range can almost fully charge the tripe power battery in ONE hour. With the shorter charging time you can store more energy inside the same time period. Element protection Can work at full load under extremely cold temperatures of down to -30C. Wi-Fi is now included with Solax X1-Hybrid-G4 V2 products so no need to purchase additional Wi-Fi equipment. Specs Weight: 24 kgRated Power: 5,000 WMin PPT Voltage: 125 VMax PPT Voltage: 550 VDC Startup Voltage: 125 VDC Shutdown Voltage: 125 VMax Input Voltage: 600 VMax DC Power: 7,500 WMax AC Power (5 Minutes): 5,001 WSurge AC Power (1 Second): 5,002 WMax DC Current: 28 AMax DC Inputs: 2Has DC Fuses: 0Connector: SUNCLIXIncluded Connectors: 2Euro Efficiency: 97 %Transformer: NoneMPPT Quantity : 2Has Integrated DC Switch: NoWarranty: 5 years

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Middlesex required around 10kWh of battery storage with a powerful hybrid inverter to meet his requirements. Sunsynk 5kW was the ideal hybrid inverter for the project with 2 x L5.3 5.32kWh Sunsynk batteries. System spec: Sunsynk 5kw 2 x L5.3 5.32kWh Sunsynk lithium batteries

Pylontech Pelio-L-5.12 LV Battery Module #2: PYL-PELIO-L-5.12 Pylontech Pelio 5.12 Datasheet Pylontech Pelio 5.12 Installation Manual Pylontech Pelio WiFi Set up Guide *Collections are not permitted due to health & safety regulations* Pylontech Pelio-L-5.12 LV Battery Module Features Expandable modular design, up to 20*5.12kWh in parallel (3-modules stack for wall mounting and 4-modules stack for ground mounting) Lightweight but high capacity batteries Smaller footprint - saving space Both indoor and outdoor compatible Secured by self-developed cells modules and BMS Dual active protection mechanism enhances safety significantly Designed for 15+ years or >8000 charging cycles Compatible with Solis low voltage hybrid/AC inverters Remote monitoring via a plug-in wifi module (supplied with the installation kit, not with the battery itself) Please note: For a wall mounted install, please add: Pylontech Pelio Wall Mount for 1 - 3 batteries (PYL-PELIO-WALL-MOUNT) For a Ground mounted install, please add: Pylontech Pelio Ground Mount for 1 - 4 batteries (PYL-PELIO-GROUND-MOUNT) Specs Weight: 45 kg Rated Power: 5,120 W Battery Type: Lithium Ion Nominal Energy: 5,120 Wh Depth of discharge: 95.00 % Voltage: 51 V Continuous Discharge Rate (Normal Use): 4,096 W Maximum Discharge Rate (5 Minutes): 5,120 W Surge Discharge Rate (15 Seconds): 6,144 W Maximum Charge Rate (5 Minutes): 5,120 W

Wall-Mounted Installation Package With Cable for Pelio-L-5.12 #2: PYL-PELIO-WALL-MOUNT Storage Systems - Accessory Wall Mounting Installation Kit for the Pylontech Pelio-L-5.12 LV Battery Module Pelio 5.12 Wall Mounted Kit Packing List This wall mounting kit includes: 1 x PELIO- left bracket 1 x PELIO- right bracket 1 x PELIO- Base 1 x PELIO-1.2 mcable /4AWG positive 1 x PELIO-1.2 mcable /4AWG negative 1 x PELIO-2.5 m RS485 communication cable/RJ45 1 x PELIO-2.5 m CAN communication cable/RJ45 2 x Communication port 1 x PELIO grounding cable 2 x PELIO- anti-tipping bracket 2 x TS51100-Pelio/outlet bracket 2 x Screw /M5×12 4 x Screw /M4×6 4 x Screw /M6X16 8 x Expansion screw/M8x60 4 x TSP120-R- waterproof cover 2 x PELIO- handle baffle 10 x Nylon countersunk head screw/ M5×10 1 x WIFI block

Ground-Mounted Installation Package With Cable for Pelio-L-5.12 #2: PYL-PELIO-GROUND-MOUNT Storage Systems - Accessory Ground Mounting Installation Kit for the Pylontech Pelio-L-5.12 LV Battery Module Pelio 5.12 Ground Mounted Operation Manual This ground mounted kit includes: 1 x PELIO- Base 1 x PELIO-2.5 mcable /4AWG positive 1 x PELIO-2.5 mcable /4AWG negative 1 x PELIO-2.5 m RS485 communication cable/RJ45 1 x PELIO-2.5 m CAN communication cable/RJ45 2 x Communication port 1 x PELIO grounding cable 2 x PELIO- anti-tipping bracket 2 x TS51100-Pelio/outlet bracket 2 x Screw /M5×12 4 x Screw /M4×6 4 x Expansion Screw /M8x60 4 x TSP120-R- waterproof cover 2 x PELIO- handle baffle 5 x Nylon countersunk head screw/ M5×10 1 x WIFI block

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Tonbridgenels requested a Givenergy 3kW AC system with 9.5kWh battery System spec: Givenergy 3kW AC charger 9.5kWh battery

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Milton Keynes requested a Givenergy 3kW AC system with 9.5kWh & 2 x 5.2kWh batteries System spec: Givenergy 3kW AC charger 1 x 9.5kWh battery 2 x 5.2kWh Batteries

(This is an example of one of our installations, this system is not actually available for free so please do not purchase) Our customer in Maldon with space for 18 x 415W JA Solar panels required around 15kWh of battery storage to meet his requirements. System spec: 18 x 415W JA Solar panels 3 x 3.5kWh US3000C Pylontech batteries 1 x 4.8kWh US5000 Pylontech batteries