Newest Products (829)

(This is an example of one of our installations, this system is not actually available for free so please do not purchase)   Our customer in Swindon with space for 6 x 480W Jinko panels on his outbuilding and opted forSolis 3kw Hybrid with the Dyness 5.12kWh battery   System spec: 6 x 480w Jinko Tiger Neo All Black Solis 3kW Hybrid Dyness 5.12kWh battery  

Fox EQ HV EQ4800-L8, 37.27kWh 1x Master 7x Slave #2:  FE-HV-EQ-8-4.8-38.4  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 8 (37.27kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 7 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 332.5 kg Battery Type: Lithium Ion Nominal Energy: 37,270 Wh Depth of discharge: 90.00 % Voltage: 583 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 1241 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L9, 41.93kWh 1x Master 8x Slave #2:  FE-HV-EQ-9-4.8-43.2  Storage Systems - Li-ion Battery Pack Fox's EQ is a high-performance, scalable battery storage system. The modular design allows for maximum flexibility. It is suitable for a broad range of storage applications. Additional batteries can be added for a maximum storage capacity of 41.94kWh. Fox EQ 4.66kWh - Stack of 8 (37.27kWh Useable Storage) Incl. Master This item consists of: 1 x Fox EQ4800, 4.66kWh HV Battery (Master) (FE-HV-EQM-4800) 8 x Fox EQ4800, 4.66kWh HV Battery (Slave).   (FE-HV-EQS-4800) EQ4800 are compatible with ECS-4800 batteries Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Features: Plug and play easy install 4.66kWh Capacity Scalable to 41.94kWh 90% Depth of Discharge Wide Temperature Tolerance CAN/RS485 Communication High Voltage Specs: Weight: 374 kg Battery Type: Lithium Ion Nominal Energy: 41,930 Wh Depth of discharge: 90.00 % Voltage: 403 V Continuous Discharge Rate (Normal Use): 2240 W Maximum Discharge Rate (5 Minutes): 4480 W Surge Discharge Rate (15 Seconds): 5785 W Maximum Charge Rate (5 Minutes): 4480 W Dimensions: 570 x 1352 x 380 (W x H x D) mm This battery requires a MINIMUM of 2 modules to work (Master + Slave). This battery can accommodate up to 9 modules in a stack (1x Master + 8 x Slaves) If you are adding battery modules to an existing Energy Cube stack, please made sure that the new batteries are compatible with your original battery module. Must be installed by a qualified electrician. Please note: In order to increase the product warranty from 5 to 10 years you must register your install with Fox online to activate the 10 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

GivEnergy Commercial SME AIO 120kW 276kWh - inc EMS and Meter #2: GIV-SME-AIO-120-276 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  36 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 4 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 4 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 2,248.2kg Max Efficiency: 98.8% Nominal Energy: 274680 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 122320 W Maximum Discharge Rate (5 Minutes): 122320 W Surge Discharge Rate (5 Minutes): 122320 W Maximum Charge Rate (5 Minutes): 122320 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

GivEnergy Commercial SME AIO 150kW 345kWh - inc EMS and Meter #2: GIV-SME-AIO-150-345 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  45 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 5 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 5 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 2,790.2 kg Max Efficiency: 90% Nominal Energy: 345600 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 152900 W Maximum Discharge Rate (5 Minutes): 152900 W Surge Discharge Rate (5 Minutes): 152900 W Maximum Charge Rate (5 Minutes): 152900 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

GivEnergy Commercial SME AIO 180kW 414kWh - inc EMS and Meter #2: GIV-SME-AIO-180-414 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  54 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 6 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 6 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 3,332.2kg Max Efficiency: 90% Nominal Energy: 414720 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 183480 W Maximum Discharge Rate (5 Minutes): 183480 W Surge Discharge Rate (5 Minutes): 183480 W Maximum Charge Rate (5 Minutes): 1834830 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

GivEnergy Commercial SME AIO 30kW 69kWh - inc EMS and Meter #2:  GIV-SME-AIO-30-69 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  9 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 1 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 6 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 622.2kg Max Efficiency: 90% Nominal Energy: 69120 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 30580 W Maximum Discharge Rate (5 Minutes): 30580 W Surge Discharge Rate (5 Minutes): 30580 W Maximum Charge Rate (5 Minutes): 30580 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

GivEnergy Commercial SME AIO 60kW 138kWh - inc EMS and Meter #2:  GIV-SME-AIO-60-138 Storage Systems - Commercial Storage  GivEnergy Commercial Product Brochure GivEnergy Commercial AIO Data Sheet GivEnergy Commercial AIO Manual GivEnergy Commercial AIO Warranty GivEnergy's All in One commercial battery pack is a compact and cost-effective commercial battery storage solution, combining battery, PCS and EMS in a single integrated system. With a plug and play easy install, space saving single integrated unit, having undergone rigorous safety checks, the inbuilt SPD and DC circuit breaker make the system safety even more robust. Lastly, cloud monitoring is simple and easy to use.  This system consists of:  18 x GivEnergy Commercial SME AIO 7.68kWh Battery (GIV-3U-BATT-7.6-ID) 2 x GivEnergy Commercial SME AIO Outer cabinet and built-in 30kW PCS (GIV-SME-ESS-CAB-ID) 2 x GivEnergy Commercial SME AIO High Voltage Box (GIV-3U-HVB-ID) 1 x GivEnergy Commercial SME AIO Energy Management System (GIV-EMS-C) 1 x GivEnergy Commercial Communication Meter (GIV-COM-METER-630)   Features Ready to go all-in-one system - 30kW AC coupled inverter, 9 x 7.68kWh batteries Fully integrated Scalable up to six units Multiple units can be stacked together Wi-Fi and LAN connectivity Interface with emergency and fault lights Intelligent air cooling IP20 rated Dimensions: 2050 x 600 x 800 (H x W x D) mm Warranty: 10 years standard Specs Weight: 1,162.2kg Max Efficiency: 90% Nominal Energy: 138240 Wh Depth of Discharge: 90% Voltage 695 V Continuous Discharge Rate (Normal Use): 61160 W Maximum Discharge Rate (5 Minutes): 61160 W Surge Discharge Rate (5 Minutes): 61160 W Maximum Charge Rate (5 Minutes): 61160 W Please note: If installing without PV, 1 Communication Meter and 3 CTs are required. Please add the necessary CTs and select the CT size based on the site's incoming power limit either: 120A CT / 400A CT.   If installing with PV, 2 Communication Meters and 6 CTs are required. Please adjust meter quantity and add the necessary CTs. Select the CT size is based on the site's incoming power limit either: 120A CT / 400A CT.  

JA Solar 525W Mono PERC Half-Cell MBB LB Traceable Black Frame MC4 #2: JAM60D-42-525-LB-TS-BF  Panels - BiFacial Double Glass JA Solar 525W Data Sheet JA Solar 525W Installation Manual JA Solar 525W Warranty JA Solar CE Declaration of Conformity Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 5 panels. For orders with no minimum please visit our Single Panels page. *Collections are not permitted due to health & safety regulations* Features Rating: 525W Efficiency: 21.5% Less levelised cost of energy (LCOE) N-Type with very low LID Better weak illumination response Better temperature coefficient Warranty: 12 year standard 30 year linear Width: 1,134mm Height: 2,333mm Specs Weight: 28 kg Rated Power: 525W MCS Reference: BABT 8515-381-525W Length: 2,063 mm Width: 1,134 mm Depth: 30 mm VMPP: 36.59 V IMPP: 14.35 A Isc: 15.21 A Voc: 43.73 V Temp. Coefficient (Mpp): -0.3 % Clamp position on panel: Long  and short side  Connector Type: Round Post Efficiency: 22.4% Pallet: Oversized Please note: Due to the size of panels and size of the gap between slats of the pallets (both length and width entries) a fork lift truck on site is required to offload these modules.

Nationwide installations are available across most areas of the UK. £750 deposit refundable to proceed with the installation process. Balance payment due prior to delivery of the system (ignore the date that will show at checkout which is only an estimate) Installation service includes DNO application, MCS & 2yr workmanship warranty. Free delivery included at checkout so VAT isn't charged on delivery. Steps to Proceed following payment of the deposit: Provide your MPAN Number found on your electricity bill Photo's of the space for the battery system with a description of the location Photo's of the consumer unit with description of location of consumer unit in relation to the location for the battery system. Photo's of a current solar inverter set up if relevant.    #5: INSTALLED-GIV-HV Storage Systems - Hybrid Inverter GivEnergy HV Li-ion Battery Stack Datasheet GivEnergy  HV Li-ion Installation Manual GivEnergy 1PH Hybrid HV Gen 3 Datasheet GivEnergy 1PH Hybrid HV Gen 3 Installation Manual GivEnergy Product Warranty Please view our battery storage information page for sizing and selecting the right battery storage system for you. Collections are not permitted due to health & safety regulations Hybrid Features GivEnergy's third generation Hybrid Inverter range can be coupled directly with solar panels to generate usable electricity as well as store excess energy for later use. Excess energy is stored in the battery for later use. In addition it minimizes importing of energy by discharging appropriately to meet demand.  Compatible with GivEnergy HV Storage - High Voltage Batteries but not compatible with the LV battery range earth bonding kit is required with every Gen 3 inverter  GIV-PE-KIT-G3 Features In-built WiFi and LAN Higher Charge/Discharge Rate Flexible Rate Tarif 12 Year Warranty 8kw Specs:  Weight: 32 kg Rated Power: 8,000 W Min PPT Voltage: 90 V Max PPT Voltage: 550 V DC Startup Voltage: 80 V DC Shutdown Voltage: 80 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 12,000 W Max DC Current: 50 A Max DC Inputs: 4 Has DC Fuses: 0 Connector: MC4 Included Connectors: 4 Euro Efficiency: 97 % Transformer: None MPPT Quantity: 2 Has Integrated DC Switch: No    Battery Features: Battery Type: Lithium iron phosphate (LFP)Capacity: 13.6.kWh Nominal Voltage: 307 V DCOperating Voltage Range: 200-600 V Up to 5 stacks possible on an inverterWarranty: 12 years Specs: Max Charge/Discharge Current: 25/25 ADepth of Discharge (DoD): 100 % Life cycles: Unlimited within the 12 year warranty C Rating: 0.5C No other accessories required other than the BMS Communication: CAN BUS Compatibility: Inverter connection for 3PH Hybrid (GIV Hybrid Inverter only)    

MC4 In Line Fuse 20A 1500V DC single. TUV Certified #2:MC4-32.0330 Inverters - String Fuses The In-line Fuse PV-K/ILF2 with a crimping connection will ensure a long-lasting, stable connection compared to the omega-style clips. Minimal energy loss, low heat generation Robust housing, safety class IP68 Cable cross section 10 AWG/6 mm² TUV certification. Standard length: 67cm (1500V)

Complete kit: 8 panel 4kW Solar Panel Kitwith choice of panels   Typical summer day expected daily generation: 16kW Typical winter day expected daily generation: 45kW     Our complete 4kW Solar Panel Kit includes:   8 x Solar panels, any solar panels can be selected from our website of up to £60+vat cost price typically 450-525W. Option to upgrade to any panels on our website by just paying the difference. 10 x Mounting equipment for standard pitched roof in portrait orientation. (For Alternative mounting requirements please request a quote.) 1 x Fox, Solis or Growatt Dual MPPT inverter. 1 x Electrics pack including solar cable, MC4's, pre-terminated cable, AC & DC Isolators, bi-directional meter.  

Duracell Energy Dura-i 5kW Hybrid Inverter PD-DH1P-5-G1 #5: DURACELL-PD-DH1P-4.6-G1 Duracell Inverter Data Sheet Duracell Inverter Manual   Duracell's Energy Dura-Dura-i 4.6kW Hybrid Inverter PD-DH1P-5-G1, is designed to elevate your solar energy potential. Crafted with Duracell's hallmark of steadfast reliability and innovation, this hybrid inverter is an excellent option for your solar energy setup. Features Hybrid and AC compatible Up to 97.3% efficiency Integrated energy meter Modular - up to 6 parallel inveters Compatible with Dura5 Battery 5 year standard warranty, 10 years optional Specs Weight: 25kg Max efficiency: 97.3% (PV to AC) Max efficiency: 94.30% (BAT to AC) Max PV Power: 9000 W Max PV Voltage: 550 V Max charge/discharge: 120A Max charge/discharge: 5000 W No of MPPT: 2 String per MPPT: 1 AC output power: 4,600 VA Output current: 22 A Rated voltage: 230 V Nominal capacity: 100 Dimensions: 585 x 485 x 175 (mm) Installation: wall mount Operating temperature: -25 °C~+60 °C Display: LED Communication Ports: CAN / RS485

Sunsynk 3ph 20kW High-Voltage Hybrid Inverter #5: SYNK-20K-SG01HP3-EU-AM2 Sunsynk 3ph Data Sheet Sunsynk 3ph Manual   Please view our battery storage information page for sizing and selecting the right battery storage system for you.   These amazing three-phase inverters have a unique feature. They can operate and balance the load, which means you can have 20% connected to one phase, 20% to another, and 60% to the third phase, and it still gives perfect phase rotation. No other inverter in their class can offer this feature.   The Sunsynk 20kW three-phase hybrid inverter is designed to reduce electricity costs by managing power from multiple sources—solar panels, batteries, the grid, generators, or wind turbines. Suitable for both home and commercial use, it delivers a continuous 20kW output and is scalable for expansion. The Sunsynk inverter accepts inputs from PV, grid power, batteries, and a generator, and can charge both lead-acid and lithium-ion batteries. Its innovative design balances loads across three phases, accommodating uneven distributions (20% on two phases and 60% on the third) while maintaining perfect phase rotation. Features Easy-to-understand display Supports Wi-Fi or GSM monitoring Smart-settable three-stage MPPT  Compatible with mains electrical grid voltages, power generators or wind turbines DC- and AC-coupled to retrofit to existing solar system Programmable supply priority for battery or grid High reliability and response speed Programmable export On or off-grid with up to sixteen modules in parallel Can operate in single-phase or three-phase mode Warranty: 5 years Specs Weight: 38.5kg Max Efficiency: 97.60% Max. DC Input Power: 26,500 W Max. AC Output Power: 22,000W Max. Discharge Current: 50A PV Input Current: 26+26A Dimensions: 408 x 638 x 237(D) (w x h x d) mm Wall mounted Take complete control of your inverter by using the Sunsynk App.   Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your preferred web browser and search www.sunsynk.net.   Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries Change all settings remotely. Our data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using our data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Real-time monitoring. The majority of our app works in real-time including any changes that you make will instantly update on your inverter. Sunsynk is integrated with Octopus Agile, Flux & Go. Our data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.  

Aiko Stellar 1N+ 645W N-Type ABC, 72 Cell, Silver Frame, Dual Glass #2: AIK-G-MCH72-645-SF-DG  Panels - Monocrystalline   Aiko 645W Datasheet Aiko 645W Installation Manual  MCS Certification    Aiko 645W Warranty Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 5 panels. For orders with no minimum please visit our Single Panels page. Delivery Due to the panel size and gap between the slats of the pallets either a fork lift truck is required on-site to offload these modules or they need to be hand lifted off by the customer. Aiko Stellar 1N+ N-Type ABC, 72 Cell, Silver Frame, Dual Glass A commercial panel with a very high efficiency of 23.9% giving investors a faster ROI. The series is also aesthetically pleasing with an elegant design. Two unique advantages over any other panels yet on the market: Aiko N-Type ABC modules are resistant to micro-cracks which can easily occur with regular modules and can significantly reduce performance Aiko N-Type ABC modules have Cell-level partial shade optimization which significantly reduces the impact of shading on the panels, which can happen from any number of reasons such as dirt, clouds trees etc. Features Winner of 2023 intersolar innovation award, Winner of 2023 Red dot design award and 2024 ESG transparency No.1 efficiency in the market Cell-level partial shade optimisation (one and only in the industry) High temperature restriction for fire safety Micro-crack resistance Better temperature coefficient at -0.26 (best in CEA PV Tech lab test report) Elegant no-busbar look Product Warranty: 15 Years Performance Warranty: 30 Years Specs Weight: 33.5kg Dimensions: 2,382 L x 1,134 W x 30 D (mm) VMPP: 45.2 V IMPP: 14.27 A Isc: 15 A Voc: 53.9 V Temp. Coefficient (Mpp): -0.26% Cable Length: 1.4m  Connector: MC4 EVO2 Clamp position on panel: Long side only Connector Type: EVO2 Efficiency: 23.9% Pallet Size: Oversized    

Sunsynk 10kW Solar Hybrid Inverter - Single Phase - WiFi Included G99 G100 #20: SYNK-10K-SG02LP1   Sunsynk 10kW Single Phase Data Sheet Sunsynk 10kW Single Phase User Manual Sunsynk Compatible Batteries Sunsynk 10kW Single Phase Warranty *Collections are not permitted due to health & safety regulations* Please view our battery storage information page for sizing and selecting the right battery storage system for you.   The SunSynk 10kW Inverter is the next generation of super hybrid inverters with a 18000W MPPT and a rated AC output of 12kW. This single phase inverter generates sufficient energy in winter offsetting  overall usage. Features Dual MPPT design  Compatible with Lithium-ion batteries and Lead Acid batteries Up to 50kWh battery pack IP65 rated Anti-islanding protection Fully programmable power export Automatic switching from Grid-Tied to Off-Grid mode Up to 16 units with the same firmware can be paralleled Warranty: 5 years standard Specs Weight: 42kg Max. Charge Current: 220A Max Discharge Current: 220A Max. PV Input Power 13,000W No of MPPT / Strings Per MPPT: 3 / 2+2+2 Rated AC Input/Output Active Power: 10,000 W Maximum Efficiency: 97.60% Max. Discharge Current 220A Take complete control of your inverter by using the Sunsynk App.  Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries. Change all settings remotely. The Sunsynk data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using the Sunsynk data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of the Sunsynk app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Sunsynk is integrated with Octopus Agile, Flux & Go. The Sunsynk data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.