Newest Products (924)

360W LONGi Solar Half Cut PERC Mono Solar Module - Full Black #4: LR4-60HPB360MFB Longi 360W Data Sheet Please check minimum order quantity prior to ordering as this varies depending on the specific panel. Minimum order for this panel: 6 panel. For orders with no minimum please visit our Single Panels page. Other panels have a minimum order of 3 - 5 panels. *Collections are not permitted due to health & safety regulations* The LONGi Hi-Efficiency Low LID Mono PERC with Half-cut technology All-Black 360W module features an attractive appearance for all settings but favoured in domestic settings.   High module efficiency and slower degradation provide better energy yield with excellent low irradiance performance. This module provides a great solution of high Wp with minimal area required. This product is supplied with MC4 connectors Manufacturer Part Number: LR4-60HPB360MFBUL CertificatePower Output: 360 Watts120 Cell, Monocrystalline35mm Depth, Black Frame, Black Backsheet1000 Volts Max VoltageManufacturer Warranty: 12 YearsMono Percium, black backsheet and black frame12-year product warranty and 25-year linear yield guarantee up to 84.5%Low LID mono Perc technology Current warranty documents indicate 15/25 Year warranty. Dimensions (mm) (H x W x D)1755 x 1038 x 35  

Sunsynk 25kW Solar Hybrid Inverter - 3-Phase - High Voltage - WiFi Included 20#: SYNK-25K-SG01HP3-EU Sunsynk 3ph 25kW Data Sheet Sunsynk 3ph 25kW User Manual Sunsynk 3ph 25kW Warranty *Collections are not permitted due to health & safety regulations* Please view our battery storage information page for sizing and selecting the right battery storage system for you. The 25kW 3-Phase Hybrid Inverter by Sunsynk is ideal for commercial and industrial settings, managing up to 65,000W and integrating seamlessly with solar, grid, and generator sources. With remote monitoring via the Sunsynk Connect app, users can optimize performance and manage power flow to reduce costs. Easy to install and maintain, this inverter supports efficient energy storage and usage managing storing power and effectively releasing power as needed. Features Built-in 2 strings for 1 MPP tracker and 1 string for 1 MPP tracker Smart settable 3-stage MPPT charging for optimised battery performance Compatible with mains electrical grid voltages or power generators  Compatible with wind turbines Auto restart while AC is recovering Fully programmable controller Overload/over-temperature/short-circuit protection Specs Max Charge Current: 50A Max Discharge Current: 50A Max DC Input Power 32,500W Max AC Input Power 25,000W Max Efficiency: 97.6% No of MPPT trackers:  2 No of Strings per MPPT Tracker: 2+2 Warranty: 5 years

SunBattery Cabinet With Door For Sunsynk 20.48kWh HV Battery #20: SUN-HV-20.48-BAT-RACK #2: SUN-HV-20.48-BATTRACK-DOOR Sunysnk HV Battery Rack Data Sheet   Sunysnk HV Battery Rack User Manual  The Sunsynk Battery Cabinet with Door is designed for the Sunsynk 20.48kWh High Voltage Series Battery System. This cabinet is suitable for housing of up to:  4 x Sunsynk 5.12kWh single battery units (for HV Series)  1 x BMS for Sunsynk HV Series 

Sunsynk Cabinet For 61.44kWh HV Battery System #20: SUN-HV-61.44-BAT-RACK #2:SUN-HV-61.44-BATTRACK-DOOR  High Voltage Data Sheet   High Voltage Installer Manual  Battery Rack with Door for Sunsynk 61.44kWh HV Battery This cabinet is suitable for housing of up to 12 modules of 5.12kWh Specs  Weight: 628kg (with 12 x modules, 1 x rack) Weight per battery module: 44kg - 85kg Battery System Power: 61.44kWh Max Charge Current: 100 V Max Discharge Current : 100 V Dimensions: 589 x 590 x 2240 (13th level) Warranty: 10 years    

Sunsynk BMS For Sunsynk HV Series #20: SUN-HV-61.44 #2:SUN-HV-BMS Storage Systems - Communication Module  High Voltage Data Sheet   High Voltage Installer Manual  Battery Management System (BMS), for Sunsynk HV-Series    

Sunsynk W-Series 10.64kW Battery IP65 Wall Mounted Integrated DC Breaker #20: SUN-W-10.64kW Sunsynk W-Series 10.64kW Data Sheet Sunsynk W-Series 10.64kW User Manual Sunsynk's W-Series IP65 LiFePO4 battery available in black or white in 5.32kWh and 10.64kWh capacities. With It's advanced (lithium iron phosphate) battery cell technology the W-Series Battery ensures reliable performance in harsh conditions.  The battery includes an inbuilt 125A MCB (Miniature Circuit Breaker) for enhanced safety and protection Features Advanced LiFePO4 battery cell technology Inbuilt 125A 4 pole MCB IP 65 rated Maximum of 32 batteries in parallel Depth of Discharge: 90% Cell level monitoring Wall or rack mounted Installer Notice:  For multiple batteries, please ensure adequate for adequate cabling and circuit protection. You CANNOT mix battery types.Specs Weight:  101kg Rated Power:  W Battery Type: Lithium Depth of discharge: 100.00 % (DOD) Voltage: 51.2 V Cycles: 6000 @90% DOD Continuous Discharge Rate (Normal Use): 2500 W Watt hours: 10,640  Dimensions 610x760x200mm (L x H x W) Warranty: 10 years

Solis Three Phase 50kW High Voltage Hybrid Inverter #2: SOL-S6-EH3P50K-H  Storage Systems - Hybrid Inverter Solis S6 50kW Inverter Data Sheet Solis S6 50kW Inverter Manual & Install Guide Solis S6 50kW Inverter Warranty Solis S6 50kW Product Compatibility List *Collections are not permitted due to health & safety regulations* Please note: Includes S4 Wi-Fi/LAN stick and Solis Cloud support. The Solis S6 Hybrid inverter offers flexibility with its 3 or 4 MPPTs. Its high input current ensures compatibility with modern high-performance modules. If there is power grid failure, the integrated switching device means selected loads can still be supplied with emergency power. Product Features 4 MPPTs / 8 strings /  up to 96kW usable PV input 50A per 10kW maximum charge/discharge rating 140A/70A+70A max charge/discharge - on 2 independently controlled ports String current up to 20A 2 second 160% surge power to accommodate back-up load Supports maximum of 6 inverters (up to 300kW) Supports unbalanced and half-wave loads on the grid and backup port Supports peak shaving control  UPS transfer time - less than 10 minutes Integrated AFCI (DC arc-fault circuit protection) LCD display and remote firm upgrades Specs Weight: 73 kg Rated Power: 50,000 W Min PPT Voltage: 180 V Max PPT Voltage: 850 V DC Startup Voltage: 180 V DC Shutdown Voltage: 150 V Max Input Voltage: 1,000 V Max DC Power: 100,000 W Max AC Power (5 Minutes): 50,000 W Surge AC Power (1 Second): 80,000 W Max DC Current: 160 A Max DC Inputs: 8 Has DC Fuses: 0 Connector: MC4 Included Connectors: 8 Euro Efficiency: 97.4% Transformer: none MPPT Quantity: 4 Has Integrated DC Switch: Yes Warranty: 5 years Extendable warranty for 5/10/15 years  

Sunsynk 5.12kWh Single Battery Unit For HV Series #20: SUN-HV-5.12 #2:SUN-HV-5.12-BATT  High Voltage Data Sheet   High Voltage Installer Manual  Sunsynk 5.12kWh Single Battery Unit For Sunsynk HV-Series    Specs Weight:  44kg Nominal Energy: 5,120Wh Depth of Discharge: 100% Voltage: 51V Continuous Discharge Rate (Normal Use):  5,120 W Maximum Discharge Rate (5 Minutes): 5,120 W Surge Discharge Rate (15 Seconds): 5,120 W Maximum Charge Rate (5 Minutes):  5,120 W    

GivEnergy 9.5kWh Li-Ion Battery Gen 3 #2: GIV-BAT-9.5-G3  GivEnergy 9.5kWh Datasheet GivEnergy 9.5kWh Installation Manual GivEnergy 9.5kWh Warranty GivEnergy Battery Cable Compatibility Chart GivEnergy's newly released Gen 9.5kWh battery offers an impressive cost/ kWh.  Featuring a smaller size and higher capacity, it is ideal for medium to large properties and  can be installed in a wider range of locations due to its compact design. The batteries are extremely safe and the battery chemistry does not contain any Cobalt, making it non-flammable. The battery pack is 99% recyclable. *Collections are not permitted due to health & safety regulations* Features Uses latest LiFePO4 prismatic cell technology Retrofit compatibility Remote firmware upgrades Easy install plug and play IP65 Rated  Specs Weight: 85kg Nominal Energy: 9,500 Wh Depth of Discharge: 100% Voltage: 51 V Continuous Rate of Discharge (Normal Use:: 6,144 W Maximum Discharge Rate (5 mins): 6,144 W Surge Discharge Rate (15 seconds) : 7,080 W Maximum Charge Rate (5 mins): 6,144 W Warranty: 12 years Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before installing. Further all installers need to ave attended GivEnergy Installer Training to install this item. A non-trained installer will void the warranty. A Givenergy system must be connected to the internet to benefit from full warranty services.

Sunsynk 12kW Solar Hybrid Inverter - Single Phase - WiFi Included G99 G100 #20: SUNSYNK-12K-SG02LP1 Sunsynk 12kW Single Phase Data Sheet Sunsynk 12kW Single Phase User Manual Sunsynk Compatible Batteries Sunsynk 12kW Single Phase Warranty *Collections are not permitted due to health & safety regulations* Please view our battery storage information page for sizing and selecting the right battery storage system for you. The SunSynk 12kW Inverter is the next generation of super hybrid inverters with a 18000W MPPT and a rated AC output of 12kW. This single phase inverter generates sufficient energy in winter offsetting  overall usage. Features Dual MPPT design  Compatible with Lithium-ion batteries and Lead Acid batteries Up to 50kWh battery pack IP65 rated Anti-islanding protection Fully programmable power export Automatic switching from Grid-Tied to Off-Grid mode Up to 16 units with the same firmware can be paralleled Warranty: 5 years standard Specs Weight: 42kg Max. Charge Current: 250A Max Discharge Current: 250A Max. PV Input Power 18,000W No of MPPT / Strings Per MPPT: 3 / 2+2+2 Rated AC Input/Output Active Power: 12,000 W Maximum Efficiency: 97.60% Max. Discharge Current 250A Take complete control of your inverter by using the Sunsynk App.  Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries. Change all settings remotely. The Sunsynk data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using the Sunsynk data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of the Sunsynk app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Sunsynk is integrated with Octopus Agile, Flux & Go. The Sunsynk data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

GivEnergy Gen3 - 3.6kW Hybrid with 9.5kWh Gen 3 #2: GIV-3.6K-G3-9.5-G3-WG Special Offers - PV and Storage Package GivEnergy 9.5kWh Datasheet GivEnergy 9.5kWh Installation Manual GivEnergy 9.5kWh Warranty GivEnergy Battery Cable Compatibility Chart  GivEnergy 3.6 Gen 3 Data Sheet  GivEnergy 3.6 Gen 3 Installation Manual This package includes:   1 x GivEnergy 9.5 kWh Li-Ion Battery Gen 3 (GIV-BAT-9.5-G3) 1 x GivEnergy 1PH Hybrid Inverter 3.6kW 3rd Generation (GIV-HY-3.6-G3) 1 x GivEnergy Plug to Plug for 9.5 and 5.12 batteries with G3 (Requires Grommet) 1 x GivEnergy Programmable Single Phase Energy Meter with CT 1 x GivEnergy Grommet for cable 1 x GivEnergy PE Bonding Kit for Gen3 Hybrid Inverters GivEnergy's newly released Gen 9.5kWh battery offers an impressive cost/ kWh.  Featuring a smaller size and higher capacity, it is ideal for medium to large properties and  can be installed in a wider range of locations due to its compact design. The batteries are extremely safe and the battery chemistry does not contain any Cobalt, making it non-flammable. The battery pack is 99% recyclable. *Collections are not permitted due to health & safety regulations* Features Uses latest LiFePO4 prismatic cell technology Retrofit compatibility Remote firmware upgrades Easy install plug and play IP65 Rated  Specs Weight: 85kg Nominal Energy: 9,500 Wh Depth of Discharge: 100% Voltage: 51 V Continuous Rate of Discharge (Normal Use:: 6,144 W Maximum Discharge Rate (5 mins): 6,144 W Surge Discharge Rate (15 seconds) : 7,080 W Maximum Charge Rate (5 mins): 6,144 W Warranty: 12 years Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before installing. Further all installers need to ave attended GivEnergy Installer Training to install this item. A non-trained installer will void the warranty. A Givenergy system must be connected to the internet to benefit from full warranty services.

GivEnergy Gen3 - 5.0kW Hybrid with 9.5kWh Gen 3 Solar Battery Storage #2: GIV-5.0K-G3-9.5-G3-WG Special Offers - PV and Storage Package GivEnergy 9.5kWh Datasheet GivEnergy 9.5kWh Installation Manual GivEnergy 9.5kWh Warranty GivEnergy Battery Cable Compatibility Chart  GivEnergy 5.0 Gen 3 Data Sheet  GivEnergy 5.0 Gen 3 Installation Manual This package includes:   1 x GivEnergy 9.5 kWh Li-Ion Battery Gen 3 (GIV-BAT-9.5-G3) 1 x GivEnergy 1PH Hybrid Inverter 5.0kW Gen 3 with bonding kit (GIV-HY-5.0.-G3-PE) 1 x GivEnergy Plug to Plug for 9.5 and 5.12 batteries with G3 (Requires Grommet) 1 x GivEnergy Programmable Single Phase Energy Meter with CT 1 x GivEnergy Grommet for cable 1 x GivEnergy PE Bonding Kit for Gen3 Hybrid Inverters GivEnergy's newly released Gen 9.5kWh battery offers an impressive cost/ kWh.  Featuring a smaller size and higher capacity, it is ideal for medium to large properties and  can be installed in a wider range of locations due to its compact design. The batteries are extremely safe and the battery chemistry does not contain any Cobalt, making it non-flammable. The battery pack is 99% recyclable. *Collections are not permitted due to health & safety regulations* Features Uses latest LiFePO4 prismatic cell technology Retrofit compatibility Remote firmware upgrades Easy install plug and play IP65 Rated  Specs Weight: 85kg Nominal Energy: 9,500 Wh Depth of Discharge: 100% Voltage: 51 V Continuous Rate of Discharge (Normal Use:: 6,144 W Maximum Discharge Rate (5 mins): 6,144 W Surge Discharge Rate (15 seconds) : 7,080 W Maximum Charge Rate (5 mins): 6,144 W Warranty: 12 years Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before installing. Further all installers need to ave attended GivEnergy Installer Training to install this item. A non-trained installer will void the warranty. A Givenergy system must be connected to the internet to benefit from full warranty services.