Solar accessories to build a complete solar pv kit

Durable 200cm weather protection canopy for batteries

Weather protection Canopy for Batteries or Inverters: 200cm Wide £61.39 + VAT

Weather protection Canopy for Batteries or Inverters #2: OTS-CANOPY-200CM Accessories - Weather Protection Outsunny Canopy Data Sheet Outsunny User Manual Protect your outdoor units from harmful rays, glaring sun and light-medium rain Features B70-051 WEATHER-RESISTANT: Protect outdoor installed units such as Inverters or Batteries from glaring sun and light-medium rain, UV RESISTANT: Shields outdoor unit against harmful rays and glaring sun thanks to the surface coating. SIMPLE DESIGN: Suitable for all home and outdoors area main unit installations ACCESSORIES INCLUDED: All necessary hardware included. For fitting on cement walls only. DIMENSIONS: 23H x 200L x 80Wcm. Wall bracket: 23H x 75Lcm.

PVC Coated Solar Mesh Bird Deterrent Kit - 30m, Galvanized Mesh £125.00 + VAT

PVC Coated Solar Mesh Bird Deterrent Kit - 30m, Galvanized Mesh #2: BIRD-MESH Enviroguard's BIRD-MESH kit is a PVC coated mesh solution that uses clips to connect it to the frame of the module. It’s more permanent and safer than nylon pigeon netting in which birds can get trapped when it degrades, and the initial outlay is balanced out by lower maintenance costs as it's easier to remove and refit during routine inspections. Installation: The clips are connected, and the mesh moulded onto the frames using the clips as fixing points. It’s quick, simple, and easy to install. This method has historically been the more widespread solution, but it is more visible and not suitable for modules with a ‘short-frame/SM’ design. Kit comprises 30 Meter Galvanised Solar Panel Weld Mesh Roll 60 Solar Panel Mesh Clips 1 Standard Wire Cutter 1 Pack Stainless Steel Corner Ties

Solar panel bird deterrent kit with mesh, clips, and cutter

Solar Panel Bird Deterrent Exclusion Kit 30m Galvanised Steel with Black PVC & clips £120.00 + VAT

Bird Deterrent 30m Solar Panel Bird Exclusion Kit (Galvanized Mesh) #1: WM134-PVC Solar panel exclusion kits keep pigeons and other pest birds out from under solar panels on pitched roofs Everything you need to treat 30m around of solar panels Kit includes wire mesh, specialist solar panel retaining clips and cutting tool 100% effective when properly installed, better than using spikes, chicken mesh or repellent gels Does not pierce roof or solar panel, no leaks no warranty issues with panels Fast and easy to install, no gluing or drilling necessary. For this kit to work the solar panel must have a minimum 20mm return lip on the underside of the frame. Kit Contents: 1 x Solar Panel Weldmesh Roll in Galvanised Steel 60 x Solar Panel Mesh Clips 1 x Standard Wire Cutters 20 x Corner Zip Ties Solar Panel Galvanised Steel Weldmesh Spec: Manufactured from: 16 gauge / 1.60 mm diameter European Grade A Hot Dipped Galvanised wire. Mesh Size: 25mm X 25mm (1" X 1") Roll Width: 200mm (0.66') Roll Length: 30m (100')

1 30m Solar Panel Bird Deterrent Mesh - Galvanised Steel and Black PVC Coated £45.00 + VAT

30m Solar Panel Bird Deterrent Mesh - Galvanised Steel and Black PVC Coated #1: WM170-TRADE Galvanised steel mesh, coated with black PVC Prevents birds from nesting underneath solar panels Use in conjunction with our solar panel mesh clips (WM132) to secure the mesh to the return lip on the underside of the solar panels

Single-use solar mesh clip for bird protection

Solar Mesh Clips Single Use Pack of 60 for 30m of mesh £48.00 + VAT

Solar Mesh Clips Single Use Pack of 60 for 30m of mesh #1: WM173-60-TRADE Simple clip on system designed specifically to keep birds out from under solar arrays These clips are a permanent fixing, once discs have been pushed onto the rod they cannot be removed Clips recommended every 450mm (18 inches) 2 clips on short edge 3 clips on long edge. Solar clips bind the mesh to the panels without drilling holes or damaging the system. Designed to fit our Solar Panel Mesh (WM133 & WM139). Nearly invisible from the ground Fast easy & highly effective, making solar panel bird exclusion straight forward Mesh Sold Separately

Solar mesh clip with nut for bird protection

Solar Mesh Clips with Nut Re-usable Pack of 60 for 30m of mesh £74.00 + VAT

Solar Mesh Clips with Nut Pack of 60 for 30m of mesh #2: WM172-60-TRADE Simple clip on system designed specifically to keep birds out from under solar arrays Unlike other solar clips the nut is designed to be removable allowing for maintenance of the solar panels Clips recommended every 450mm (18 inches) 2 clips on short edge 3 clips on long edge. Solar clips bind the mesh to the panels without drilling holes or damaging the system. Designed to fit our Solar Panel Mesh (WM133 & WM139). Nearly invisible from the ground Fast easy & highly effective, making solar panel bird exclusion straight forward Mesh Sold Separately

Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm

Renusol Console+ bucket - I.T.S Technologies

1 Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm £63.00 + VAT

Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm#2: REN-520075-K#3: 2089 Renusol Brochure Renusol Datasheet Minimum order - 5 Renusol Console+ bucket - minimum order of 5 units unless ordered together with solar panels For panels of more than 1014mm width the elongation rails are required. Renusol Console+ 5200 75 KThe ConSole+ provides an angle of 15 degrees.The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+.The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.Details:- Colour: black- Suitable for flat-roof- and ground mounting installations- For framed PV-modulesTechnical Data:- Material: HDPE, Aluminium and stainless steel- Max module length: 1550-2150 mm- Holes gap - width: 895-1014 mm- Holes gap - length: 690-1180 mmOther Contents:- 1 x 500075 ConSole+- 2 x 400005 ConSole U-Profile 1035 mm- 4 x 900027 Hexag# screw DIN933-M6x20 A2-70- 4 x 900028 Washer DIN9021-6,4-A2- 4 x 900029 Self-locking hexag# nut DIN985-M6-A2- 4 x 900106 ConSole Clip- 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8

Elongation rails for ConSole solar mounting hardware

2 Elongation rails for ConSole 4.1, 4.2, 5.2, 6.2, CS+ ( x2 ) £7.00 + VAT

Elongation rails for ConSole 4.1, 4.2, 5.2, 6.2, CS+ ( x2 )#2: REN-460196 Required for panels of 1014mm wide+ Part No: REN-460001 Mounting - Flat Roof Trays This rail enables modules of different widths to be mounted on the ConSole+. 2 x rail; 4 x hexagon head screw DIN933-M6x20 A2-70, 4 x washer DIN9021-6,4-A2, 4 x self-locking hexagon nut DIN985-M6-A2 Material: Aluminum, stainless steel Weight: 0.127 kg Dimensions: 175 x 25 x 12 mm (2x) Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.

Concrete ballast block 17kgs for solar installations

Concrete ballast blocks supporting solar panel structure

Solar panel mounting system with concrete ballast blocks

Solar panels mounted on concrete ballast blocks

Concrete Ballast Block 17kgs £2.78 + VAT

Concrete Ballast Block 17kgs #2: BALLAST-17KG Mounting - Flat Roof Ballast Data Sheet Ballast Block - Install Guide Only available to purchase together with solar panels or mounting The Enviroblock ® is a Solid Dense 7.3N Concrete Block. It is manufactured from secondary and recycled materials and comes in a natural grey finish. Durable and non-penetrable, it can be used with all ballasted mounting solutions for domestic, industrial and commercial flat roof installations to maximise harvesting of solar power. Specs: Height: 215 mmLength: 440 mmWidth: 100 mmWeight approx. 17 kgs

1 Emlite 1-ph generation meter 100A (1000 pulse/kWh) £33.80 + VAT

Emlite 1-ph generation meter 100A (1000 pulse/kWh) #2: EM-ECA2 Meters - Single Phase Generation Meters#3: 2501 Emlite 1ph Installer Notes Emlite 1ph Certification Emlite 1ph Warranty Emlite Single Phase Total Generation Meter 100A with Pulse Output The ECA2 single phase meter is one of the worlds most compact metering units The meter provides measurement of active (kWh) energy in both import and export directions with registers shown on the large easy to read LCD display. The display features 8Ã—3.5mm characters and can be configured to auto cycle any of the available registers or remain static with only a single register viewable Part Code: ECA2.v Does not come with CT's.

Emlite solar energy generation meter with cover

Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover £41.66 + VAT

Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover #2: EM-ECA2-BI Meters - Single Phase BiDirectional#3: 2814 Emlite 1ph Datasheet Emlite 1ph Installer Notes Emlite 1ph Warranty Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values. NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.This meter meets the â€œBi-directional meterâ€_x009d_ criteria as listed in â€˜Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2)â€™ document released by OFGEM.

Emlite 3-ph Bi-directional generation meter EMP.az, 100A (1000 pulse/kWh) £97.69 + VAT

Emlite 3-ph Bi-directional generation meter EMP.az, 100A (1000 pulse/kWh) #1: EMP1-AZ Emlite 3-ph Data Sheet Emlite 3ph User Manual Emlite 3-ph Certification Part of the Emlite three phase metering range which offers superb meters for a wide range of applications where basic metering is needed. They are of high quality and sturdy construction with features normally found in more expensive meters. Product Features Accuracy Class A and B 4 quadrant energy measurement Optional power quality information Configurable pulsed outputs Clear and easy to read LCD display Solid Brass terminals Optional finger guard for main terminals

MC4 Connector Twin Pack for solar panels

1 MC4 Connector Twin Pack ( Kit 1 ) 0014/0015 £5.10 + VAT

MC4 Connector Twin Pack ( Kit 1 ) 0014/0015 #2: MC4-CONN14-2-PACK A pack of 2x Male and 2x Female cable couplers (including insulating part) Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm ² Rated current: 39 A (for 4 and 6mm2 cable) Rated voltage: 1000 V IP Rating: IP65 / IP68 when mated (1h / 1min) Cross section: 4 - 6 mm ² Outer diameter cable (dA): 5,0 - 6,0mm Please use correct MC4 approved tools to crimp these connectors on to bare cables. Supplier code: 32.0014P0001-UR and 32.0015P0001-URKeywords: MC4CONN2PACK, Multi Contact, PV Cable

MC4 Pre terminated cable 2m (1 pack) £5.61 + VAT

MC4 Pre terminated cable 2m (1 Pack) #2: MC4-2M-1 Cables - Pre Terminated Cables Minimum order - 5 units or available to order together with other items Weight: 0.13 kgLength: 2 mArea: 4 mm2Colour: BlackCores: 1 - NMax Current: 44

MC4 pre-terminated solar cable 2m, pack of 2

MC4 Pre terminated cable 2m (Pack of 2) £13.50 + VAT

MC4 Pre terminated cable 2m (Pack of 2) 2:MC4-2M-2PACK Cables - Pre Terminated Cables This items consists of2x2m cable, 1xMale, 1xFemale each MC4 Pre-terminated MC4 Cable Data Sheet MC4 Cable Install Manual MC4 Product Compatibility Specs Weight: 0.3 kg Length: 2 m Area: 4 mm2 Colour: Black Cores: 1 - N Max Current: 44

MC4 Pre terminated cable 5m (1 Pack) £12.29 + VAT

MC4 Pre terminated cable 2m (1 Pack) #2: MC4-5M-1 Cables - Pre Terminated Cables Weight: 0.29 kgLength: 5 mArea: 4 mm2Colour: BlackCores: 1 - NMax Current: 44

1 2 3

Find anything you need

Solar Accessories (76)

Nationwide UK Delivery

Expert system advice

Trade Prices & volume discounts

ITS Technologies

ITS Technologies