Products – Page 39 – ITS Technologies

Pylon US5000 and US5000-B specifications chart

Pylontech ESS and inverters compatibility list part 1

Pylontech ESS and inverters compatibility list part 2

3 PylonTech US5000 -1C 4.8kWh Li-Ion Solar Battery 48V £899.00 + VAT

Pylontech US5000 -1C 4.8kWh Li-Ion Solar Battery 48V (excl. brackets) #2: PYLON-US5000-1C Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other. US5000-1C Datasheet US5000-1C Installation Manual US5000-1C Warranty US5000-1C Compatibility Sheet To view complete kits please visit our Pylontech main page The Pylontech US5000-1C offers upgraded firmware and increased operation logic from 0.8C to 1.0C. When adding the Pylontech US5000-1C to an existing stack of US5000 then the US5000-1C will need to be the master master. Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 7-year warranty extendable to 10 Long cycle life and superior performance Compatible with tier 1 inverter brands Please note: To activate the extended warranty it must be registered online via this link: http://en.pylontech.com.cn/service/support Specs Supplier Part No: US5000 1C Weight: 40.4 kg Rated Power: 5,000 Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W IIn accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries have been installed by an electrician or authorised installer. Buy Pylontech US5000 here lowest prices.

46 PylonTech US5000-1C 4.8kWh 95% D.O.D Battery Storage £890.00 + VAT

Pylontech US5000-1C 4.8kWh Li-Ion Solar Battery 48V Please view our battery storage information page for sizing and selecting the right battery storage system for you. Please note that US2000/C, US3000/C & US5000/1C are all compatible with each other. #4 PYLON-US5000-1C#5: Pylon 4.8kWh US5000 Li-ion Battery US5000 Datasheet US5000 Installation Manual US5000 Warranty US5000 Compatibility Sheet Connecting cables included as standard To view complete kits please visit our Pylontech main page A new battery in the US series from Pylontech. The US5000-1C is a 48V battery with incredible features to provide a competitive edge in the market. Product Features Modular design for ease of expansion Higher usable capacity resulting in less battery modules installed Usable capacity 4 560Wh Parallel Capability of up to 16 units Allows for large installation of up to 72.96kWh with no LV Hub Intelligent BMS protecting battery cells 95% DoD with more usable capacity RS485 and CAN compatible Comes with a 5-year warranty extendable Long cycle life and superior performance Compatible with tier 1 inverter brands To extend the warranty you have to register here: http://en.pylontech.com.cn/service/support Supplier Part No: US5000-1C Weight: 38 kg Battery Type: Lithium Ion Nominal Energy: 4800 Wh Depth of discharge: 95.00 % Voltage: 48 V Continuous Discharge Rate (Normal Use): 2400 W Maximum Discharge Rate (5 Minutes): 4800 W Surge Discharge Rate (15 Seconds): 5808 W Maximum Charge Rate (5 Minutes): 4800 W In accordance with Pylontech's warranty conditions. The warranty is only valid if the batteries have been installed by an electrician or authorised installer.

1 Q Cable Disconnect Tool (1 Item) £3.00 + VAT

Q Cable Disconnect Tool (1 Item)#1: EN-Q-DISC Tools - Accessories#3: 3419Enphase Cable disconnect tool for Q Cable connectors, DC connectors and AC module mount.Orders only with other enphase components

Q-Cable round 3 Phase AC Branch Terminator (1 Item) £14.00 + VAT

Q-Cable round AC Branch Terminator (1 Item)#1: EN-Q-TERM-3P Accessories - Cable termination capsEnphase round Q Cable Terminator cap for unused cable ends - required to terminate each circuit. Single item only.

Racky Rax Cabinet 12U 550D - Black £169.03 + VAT

Racky Rax Cabinet 12U 550D - Black #2: RR-W2-12-G Racky Rax 12 Data Sheet Racky Rax 12 Manual This cabinet is suitable for housing of up to:5 x Pylontech US2000B Plus Lithium-Ion batteriesor3x Pylontech US3000 Lithium-Ion batteriesor3x Fox ESS HV2600 Lithium-Ion batteriesDimensions assembled - W 550mm X D 550 mm X H 615mm. Each cabinet comprises a welded steel frame and adjustable front and rear mounting profiles. The cabinets feature ventilation slots in the top, have a lockable glass front door, and removable sides. The cabinet is finished in a high quality attractive black. Batteries need to be attached using front battery mounting holes only.Ready assembled

Racky Rax Cabinet 9U 550D - Black £162.51 + VAT

Racky Rax battery Cabinet 9U 550D - Black #2: RR-W2-9-G Racky Rax 9 Data Sheet Racky Rax 9 Manual This cabinet is suitable for housing of up to:4 x Pylontech US2000B Plus Lithium-Ion batteriesor2x Pylontech US3000 Lithium-Ion batteriesDimensions assembled - W 550mm X D 550 mm X H 455mm. Each cabinet comprises a welded steel frame and adjustable front and rear 19â€_x009d_ mounting profiles. The cabinets feature ventilation slots in the top, have a lockable glass front door, and removable sides. The cabinet is finished in a high quality attractive black. Batteries need to be attached using front battery mounting holes only. Ready assembled

Red and black 25mm2 battery cable for solar energy

Red & Black 25mm2 Battery Cable £34.00 + VAT

Red & Black 25mm2 Battery Cable set price per 1.5 meter 2: BATCAB25-1.5M-PAIR This part is made up of the following items:1 x BATCAB25-1.5M-RED 25mm2 Battery Cable (H01N2-D) 1.5m - Red 1 x BATCAB25-1.5M 25mm2 Battery Cable (H01N2-D) 1.5m - Black

Red & Black 25mm2 Battery Cable £34.00 + VAT

Red & Black 25mm2 Battery Cable set price per 1.5 meter 2: BATCAB25-1.5M-PAIR This part is made up of the following items:1 x BATCAB25-1.5M-RED 25mm2 Battery Cable (H01N2-D) 1.5m - Red 1 x BATCAB25-1.5M 25mm2 Battery Cable (H01N2-D) 1.5m - Black

Red & Black 35mm2 Battery Cable set - per meter £16.00 + VAT

Red & Black 35mm2 Battery Cable set price per 1 meter 2: BATCAB35-1M-PAIR This part is made up of the following items:1 x BATCAB35-1M-RED 35mm2 Battery Cable (H01N2-D) 1m - Red 1 x BATCAB35-1M 35mm2 Battery Cable (H01N2-D) 1m - Black

Renusol Console+ bucket - I.T.S Technologies

1 Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm £71.00 + VAT

Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm#2: REN-520075-K#3: 2089 Renusol Brochure Renusol Datasheet Minimum order - 4 For panels of more than 1014mm width the elongation rails are required. Renusol Console+ 5200 75 KThe ConSole+ provides an angle of 15 degrees.The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+.The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.Details:- Colour: black- Suitable for flat-roof- and ground mounting installations- For framed PV-modulesTechnical Data:- Material: HDPE, Aluminium and stainless steel- Max module length: 1550-2150 mm- Holes gap - width: 895-1014 mm- Holes gap - length: 690-1180 mmOther Contents:- 1 x 500075 ConSole+- 2 x 400005 ConSole U-Profile 1035 mm- 4 x 900027 Hexag# screw DIN933-M6x20 A2-70- 4 x 900028 Washer DIN9021-6,4-A2- 4 x 900029 Self-locking hexag# nut DIN985-M6-A2- 4 x 900106 ConSole Clip- 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8

Close-up of S1000 Power Optimizer connectors

S-Series Power Optimizer compatibility table

S1000 Power Optimizer £51.00 + VAT

S1000 Power Optimiser Long Input (1.3m) #3: S1000-MC4 Inverters - Optimisers SE S1000 Optimiser Datasheet Minimum order: 4 Units S1000 Power Optimizer Specifically designed to work with SolarEdge Comercial inverters Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading Faster installations with simplified cable management and easy assembly using a single bolt Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%) Weight: 1.09 kgMin PPT Voltage: 12 VMax PPT Voltage: 125 VDC Startup Voltage: 12 VDC Shutdown Voltage: 125 VMax Input Voltage: 125 VMax DC Power: 1,000 WMax DC Current: 15 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 2MPPT Quantity : 1Has Integrated DC Switch: No

Close-up of SolarEdge S1000 Power Optimizer connectors

Rear view of S1000 Power Optimizer with mounting bracket

S1000 Power Optimizer Long Input (1.3m) £55.00 + VAT

S1000 Power Optimiser Long Input (1.3m) #3: S1000-LI-MC4 Inverters - Optimisers SE S1000 Optimiser Datasheet Minimum order: 4 Units S1000 Power Optimizer Long Input (1.3m) Specifically designed to work with SolarEdge Comercial inverters Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading Faster installations with simplified cable management and easy assembly using a single bolt Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%) Weight: 1.09 kgMin PPT Voltage: 12 VMax PPT Voltage: 125 VDC Startup Voltage: 12 VDC Shutdown Voltage: 125 VMax Input Voltage: 125 VMax DC Power: 1,000 WMax DC Current: 15 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 12MPPT Quantity : 1Has Integrated DC Switch: No

s series power optimiser compatiblity sheet

S1200 Power Optimiser £60.00 + VAT

SolarEdge S1200 Power Optimiser #2: S1200-MC4 Inverters - Optimisers SE S1200 Optimiser Datasheet Minimum order: 4 Units Part No: S440-MC4 Inverters - Optimisers Specifically designed to work with SolarEdge Comercial inverters Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading Faster installations with simplified cable management and easy assembly using a single bolt Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%) Note: The S1200 has a higher operating current. When pairing the S1200 with an inverter that has built-in 25A fuses, you must replace the fuses with 30A fuses before commissioning. A fuse replacement kit is available (Part number FLD-DCD-SEL1-FUSE). The applicable inverter Part Numbers are as follows: SExxK-xxxxIxxCx, SExxK-xxxxIxxDx, SExxK-TWxxIxxLx, SExxK-xxxxIxxZx. Weight: 1.09 kgMin PPT Voltage: 12 VMax PPT Voltage: 125 VDC Startup Voltage: 12 VDC Shutdown Voltage: 125 VMax Input Voltage: 125 VMax DC Power: 1,200 WMax DC Current: 15 AMax DC Inputs: 2Has DC Fuses: 0Connector: MC4Included Connectors: 12MPPT Quantity : 1Has Integrated DC Switch: NoEuro Efficiency: 98.6 %Transformer: N/AMPPT Quantity : 1Has Integrated DC Switch: No

Front view of S440 Solar Edge Power Optimiser

Compatibility table for Solar Edge Power Optimisers

Features of Solar Edge PV power optimization

Specifications for S440 and S500 Power Optimisers

S440 Solar Edge Power Optimiser £49.00 + VAT

SolarEdge S440 Power Optimiser #2: S440-MC4 SE S440 Optimiser Datasheet SE S440 Optimiser Ground Mounted Manual SE S440 Optimiser Certification SE S440 Optimiser Warranty Minimum order: 4 Units Part No: S440-MC4 Inverters - Optimisers Specifically designed to work with SolarEdge residential inverters Mitigates all types of module mismatch loss, from manufacturing tolerance to partial shading Faster installations with simplified cable management and easy assembly using a single bolt Detects abnormal PV connector behavior, preventing potential safety issues Module-level voltage shutdown for installer and firefighter safety Flexible system design for maximum space utilization Compatible with bifacial PV modules Superior efficiency (99.5%)

S500 Solar Edge Power Optimizer £50.00 + VAT

S500 Solar Edge Power Optimiser #2: S500-MC4#3: 4152 #4: S500-1GM4MRM S500 Datasheet S500 Installation guide S500 Warranty Minimum order: 4 Units The S-series Power Optimizers are smarter and safer with patented SolarEdge technology delivering more safety features and, with new improved cable management, the S-series speeds up the stringing of the Power Optimizers. Here is a brief summary of the main benefits: Faster installation with simplified cable management Integrated sensors for outstanding system safety Automatic pinpointed and actionable alerts in the monitoring system in case of abnormal system behaviour (requires inverter firmware update expected in Q4/2021) Higher Power Optimizer specification to support next generation PV modules Compliant with the latest EU standards Reduced number of product variants for easier ordering and logistics Specifications: Max input Voc: 60V Max current Isc: 15A Minimum number of optimisers: 8 Maximum number of optimisers: 25

Warranty stamp for SMA 110kW solar extension

SMA 110kW < 150kW Active Warranty Extension of 5 Years to 10 Years £910.00 + VAT

SMA 110kW < 150kW Active Warranty Extension of 5 Years to 10 Years This warranty extension increases your warranty from 5 years to 10 years. Please note that this is for the Active warranty extension, and it can only be ordered retrospectively. To be able to place the order, the purchase receipt or the commissioning report of the end customer must be submitted. How to proceed with ordering the extended warranty: Select Your Warranty Extension: Choose the relevant warranty extension for your inverter. Place Your Order: Submit your warranty extension order through our standard ordering process. Provide Additional Information: Installation date, address and inverter serial number Process Time: Once your order is placed, our team will initiate the process of ordering the extended warranty from the manufacturer. Kindly note that it may take approximately 6 to 8 weeks for the warranty certificate to be generated and received. From the date of ordering or the date of installation if a later date. Stay Updated: We will notify you as soon as the warranty certificate is ready for download. An email notification will be sent to your registered email address.

Find anything you need

Products (875)

Nationwide UK Delivery

Expert system advice

Trade Prices & volume discounts

ITS Technologies

ITS Technologies