Build a PV kit (72)

Z Bracket for solar panel flat surface installation 4PCS (1 panel) #12: 002024 Minimum order - 4 Delivery time - 5 days 4 PCS Solar Panel Bracket, Solar Panel Mounting Bracket Aluminum Alloy Module Z Bracket Holder Stand with stainless steel, Nuts and Screws for RV Boat Wall Caravans Yacht Off-Gird Roof Installation (Silver) Stainless steel, anti corrosive screws, warranty this product for 10 years! The nuts, bolts and other hardware are solid stainless steel. The brackets are made from 2mm aluminium. For solar panels up to 300W a set of 4 mounting accessories is required but for larger modules it is recommended to use at least 6 brackets. Content: 4x Z-Shape Tabbed Solar Panel Brackets 8x Stainless Steel Self Tapping Screws 4x Stainless Steel Spring Washers 4x Stainless Steel Short Bolts 4x Stainless Steel Washers 4x Stainless Steel Nuts

Adjustable tilt mounting frame kit for solar panels to flat service 15-30 degrees (1 panel) #12: ING-ATL-15-30 Minimum order - 4 Please note: this mounting system is not MCS certified which is not currently required for flat roof or ground mount The mounting angle is regulated between 15deg to 30deg, support kit for tilted installation of a flat surface, concrete, tiles, timber, or corrugated style roofs. Complete kit for mounting 1 solar panel. Do you have a flat roof that will reduce the efficiency of the solar panels? We have the solution to this common problem. Our new innovative product will raise the panels from 0 degrees to 15-30 degrees using two extendable aluminium "legs" and a set of support clamping mechanisms in the front. The mounting kit is suitable for all types of solar panels from 100W to 550W. Our adjustable inclination angle was designed with the intention of supporting solar projects that have: flat roofs concrete roofs corrugated sandwich-type roofs metal roofs fibre cement narrow canal boats and recreational vehicles. The performance of the panel will drop by 30-40% if installed completely flat without inclination towards to southern hemisphere. At 15 and 30 degrees, the energy production will reach the actual power rating of the solar panel as it is stated by the manufacturer. For larger PV arrays, we recommend you add 1200mm rails with joiners and compatible middle & end clamps.

Adjustable Portrait landscape frames for ground mount & flat roof- cost per panel #8: ING-TPF-Kit Portrait Installation of Triangular Adjustable Mountings Drawings for Triangle Position Please note: this mounting system is not MCS certified which is not currently required for flat roof or ground mount Minimum order - 5 Delivery time - 2-3 days Required information - following order please confirm the depth of the solar panels and the number of rows Mounting system only suitable for 30 & 35mm solar panel frames Mounting kit includes all required components for the mounting - for use with ballast or other means to secure the frame to the surface. A clever aluminum and stainless steel structure. The triangle's back pilar is adjusted to create different angle inclinations. Maximize the use of space and improve the performance of solar panels. INCLINATION ANGLE 10 TO 35 DEGREES The adjustable triangles offer two major advantages to all solar photovoltaic systems when the panels are installed on flat surfaces.MAXIMISE THE USABLE AREA AND INSTALL MORE PANELS. Installing multiple rows of solar arrays will cast shadows on each other if the space and angle are not calculated correctly. With adjustable triangles, the panels will be adjusted on-site to avoid the shadowing effect and at the same time, the space will be used smartly to install even more panels. OPTIMISE THE PERFORMANCE OF THE PANELS AT DIFFERENT SEASONS OF THE YEARThe earthing is moving and every season the distance and angle of sun rays vary. Based on your actual coordination it is possible to change the angle of your panels 3-4 times every year to capture the sun at the right angle. This simple adjustable will yield an additional 20% of more energy. HOW TO MOUNT THE TRIANGLESA foundation is not required to install the triangles on the ground. Solid concrete blocks are adequate to support the aluminum frames. Strong wall plugs and screws are required to secure the aluminium frames on the concrete blocs. COMPATIBLE SIZE OF SOLAR PANELSThe structure works for all panels from very small 200W to the largest 600W panels with a height over 2.2meters.

Renusol Console+ bucket for flat roof or ground mount Max module length: 1550-2150 mm#2: REN-520075-K#3: 2089 Renusol Brochure Renusol Datasheet Minimum order - 4 For panels of more than 1014mm width the elongation rails are required. Renusol Console+ 5200 75 KThe ConSole+ provides an angle of 15 degrees.The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+.The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads. The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads. Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.Details:- Colour: black- Suitable for flat-roof- and ground mounting installations- For framed PV-modulesTechnical Data:- Material: HDPE, Aluminium and stainless steel- Max module length: 1550-2150 mm- Holes gap - width: 895-1014 mm- Holes gap - length: 690-1180 mmOther Contents:- 1 x 500075 ConSole+- 2 x 400005 ConSole U-Profile 1035 mm- 4 x 900027 Hexag# screw DIN933-M6x20 A2-70- 4 x 900028 Washer DIN9021-6,4-A2- 4 x 900029 Self-locking hexag# nut DIN985-M6-A2- 4 x 900106 ConSole Clip- 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8

Elongation rails for ConSole 4.1, 4.2, 5.2, 6.2, CS+ ( x2 )#2: REN-460196 Required for panels of 1014mm wide+ Part No: REN-460001 Mounting - Flat Roof Trays This rail enables modules of different widths to be mounted on the ConSole+. 2 x rail; 4 x hexagon head screw DIN933-M6x20 A2-70, 4 x washer DIN9021-6,4-A2, 4 x self-locking hexagon nut DIN985-M6-A2 Material: Aluminum, stainless steel Weight: 0.127 kg Dimensions: 175 x 25 x 12 mm (2x) Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.

GSE Portrait Ground - Please provide details of panels 7 layout for a bespoke quote #2: GSE-GROUND-MOUNT GSE Datasheet GSE Manual Minimum order - 4 must be purchased together with solar panels Please note: The price varies greatly depending on layout so this item must be quoted for based on the number of panels & layout. The GSE Ground mount system is a ballasted system, for portrait PV Modules. This system is adjustable between 7 and 40 degrees and required and box frame for every 2 portrait panels. This system has been paired with the Fastensol 3300mm H profile Rail F-R3300-H to maximise both value and simplicity.This ground mount system is quick to install, cost effective and compatible with 95% of PV modules on the market.   Upon ordering we require the layout of the panels for the correct supply of components. Please note the frames fit 2 panels each, however this listing costs the components per panel for simplicity and requires ordering 1 unit per solar panel to be installed. Mounting kit includes all required components for the mounting only and does not include ballasts:   Fastensol 3300mm H profle Rail Fastensol Rail Bolt M10 GSE Ground Mount Box Base - Bottom GSE Ground Mount Box Base - Front/Back GSE Ground Mount Box Base - Side GSE Ground Mount Box Base - Bottom Bracket GSE Ground Mount Box Base - Top Bracket GSE Ground Mount L corner Fixed GSE Ground Mount L corner Adjustable GSE Ground Mount M6 Screw & Washer GSE Ground Mount M6 Nut GSE Ground Mount M10 Nut GSE Ground Mount M10 Screw and Washer Fastensol H Rail Splice Fastensol Black End Clamp (30mm) Fastensol Black Mid Clamp (30mm)

Landscape North south flat roof mounting - #1: landscape-mounting-pitch-roof Minimum order - 4 & must be purchased together with solar panels Please note: The price varies greatly depending on layout so this item must be quoted for based on the number of panels & layout. Mounting kit includes all required components for the mounting. Ballasts can be purchased separately. Layout must be provided following order for the correct design

Portrait Renuol Metasol mounting for box profile - cost per panel #2: Metasol-mounting-box-profile Renusol Datasheet Renusol Manual Renusol MCS Minimum order - 5 must be purchased together with solar panels Please note: Price is for a standard portrait layout. A non-standard layout will need to be quoted and may incur additional costs. Mounting kit includes all required components for the mounting. Layout and roof type must be provided following order for the correct design & supply Renusol mounting system

Landscape Renuol Metasol mounting for box profile - cost per panel#1: Metasol-mounting-box-profile-Landscape Renusol Datasheet Renusol Manual Renusol MCS Minimum order - 5, must be purchased together with solar panels Please note: Price is for a standard landscape layout. A non-standard layout will need to be quoted and may incur additional costs. Mounting kit includes all required components for the mounting. Layout and roof type must be provided following order for the correct design & supply Renusol mounting system

Emlite 1-ph Bi-Directional generation meter 100A (1000 pulse/kWh) incl. Cover #2: EM-ECA2-BI Meters - Single Phase BiDirectional#3: 2814 Emlite 1ph Datasheet Emlite 1ph Installer Notes Emlite 1ph Warranty Emlite Bi-Directional meter provides three different readings that scroll across on the screen automatically; these readings are Import, Export and NET values. NET Values should be used as Feed In Tariff readings when used with DC coupled storage or Hybrid (PV and Battery) inverters.This meter meets the Bi-directional meterâ€_x009d_ criteria as listed in ‘Guidance for generators: Co-location of electricity storage facilities with renewable generation supported under the Renewables Obligation or Feed-in Tariff schemes (Version 2) document released by OFGEM.

Emlite 1-ph generation meter 100A (1000 pulse/kWh) #2: EM-ECA2 Meters - Single Phase Generation Meters#3: 2501 Emlite 1ph Installer Notes Emlite 1ph Certification Emlite 1ph Warranty Emlite Single Phase Total Generation Meter 100A with Pulse Output The ECA2 single phase meter is one of the worlds most compact metering units The meter provides measurement of active (kWh) energy in both import and export directions with registers shown on the large easy to read LCD display. The display features 8×3.5mm characters and can be configured to auto cycle any of the available registers or remain static with only a single register viewable Part Code: ECA2.v Does not come with CT's.

Firefighter Safety Switch 4P 2xMPPT 16A 1000V / 32A 650V with knock outs #2: SAN-DFS-14 Switches - Firefighter Safety The new, improved Firefighter's Safety Switch system from Santon is designed for automatic (remote/motorised) disconnection of the DC output from an installed array of PV modules. 16A 1000V 20A 850V 25A 800V 32A 650V The Firefighter Safety Switch system can operate/disconnect a PV installation quickly, completely and remotely with one simple action at the control-panel interface, or even by remote actuation using the mobile phone network. By shutting off the installation, no DC power is conducted from the array through the property which results in a safe situation for firefighters to fight the fire and enter the building. This unit is 16A 1000V / 32A 650V 4P and it has cable knock outs only.

 MC4 Connector Twin Pack ( Kit 1 ) 0014/0015 #2: MC4-CONN14-2-PACK A pack of 2x Male and 2x Female cable couplers (including insulating part) Snap-in lock Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool Proven MULTILAM technology with high long-term stability, which ensures consistently low performance loss throughout the entire service life of the plug connector Tried and tested plug connectors, 14 years of experience in the field Suitable for assembly with cross-sections of 4 and 6 mm ² Rated current: 39 A (for 4 and 6mm2 cable) Rated voltage: 1000 V IP Rating: IP65 / IP68 when mated (1h / 1min) Cross section: 4 - 6 mm ² Outer diameter cable (dA): 5,0 - 6,0mm Please use correct MC4 approved tools to crimp these connectors on to bare cables. Supplier code: 32.0014P0001-UR and 32.0015P0001-URKeywords: MC4CONN2PACK, Multi Contact, PV Cable

MC4 Pre terminated cable 2m (1 Pack) #2: MC4-2M-1 Cables - Pre Terminated Cables Minimum order - 5 units or available to order together with other items Weight: 0.13 kgLength: 2 mArea: 4 mm2Colour: BlackCores: 1 - NMax Current: 44

MC4 Pre terminated cable 2m (1 Pack) #2: MC4-5M-1 Cables - Pre Terminated Cables Weight: 0.29 kgLength: 5 mArea: 4 mm2Colour: BlackCores: 1 - NMax Current: 44

4mm2 single-core DC solar cable 25m - Black #1: CABLE4-1-25 Cables - DC Cables 4 mm ², single-core, black, 25m NEW H1Z2Z2-K certified 50m solar cable with length label. Manufactured against the latest European Standard EN 50618 and with the harmonised designation H1Z2Z2-K, these Solar DC Cable are specified cables for use in Photovoltaic (PV) systems, and in particular those for installation at Direct Current (DC) side with a nominal DC voltage of up to 1.5kV between conductors as well as between conductor and earth, and not exceeding 1800V. EN 50618 requires cables to be low smoke zero halogen and be flexible tin-coated copper conductors with a single core and cross-linked insulation and sheath. Cables are required to be tested at a voltage of 11kV AC 50Hz and have an operating temperature range of -40oC to +90oC. H1Z2Z2-K supersedes the previous TÆ’Å“V approved PV1-F cable. H1Z2Z2-K PHOTOVOLTAIC CABLE CONSTRUCTION Conductor Flexible tinned copper (Class 5) Insulation Halogen-free cross-linked compound Outersheath Halogen-free cross-linked flame retardant compound The compounds used in these solar cable's insulation and outersheath are halogen free cross-linked, hence the reference to these cables as "cross-linked solar power cables". The EN50618 standard sheathing has a thicker wall than the PV1-F cable version.